magpieman Posted February 3, 2014 Report Share Posted February 3, 2014 hi all, i just bought a pre owned AA s200 with the 10 shot conversion kits installed, it appears to glitch out periodically, ie not cycle / index properly, i hear there is a hex bolt you can tweak to tune the unit, can any one please elucidate ? also i got a stirrup with the rifle which has thrown me off a bit as im not sure its working correctly, seems like when i get up to around a 100 bar raising the pump feels really difficult and kinda spring loaded like its pulling you down ? no matter how much i pump i can seem to get it to really fill up, it becomes immensely difficult lol Quote Link to comment Share on other sites More sharing options...
Lord Geordie Posted February 3, 2014 Report Share Posted February 3, 2014 Sounds like the pump may need a strip and checked out! May get away with a clean but may require a seal kit! Quote Link to comment Share on other sites More sharing options...
NIGHT SEARCHER Posted February 3, 2014 Report Share Posted February 3, 2014 Has the pump got any filters on it. If so could be blocked. Pumps are easy to strip and re-build with new seals. Have a look on YOUTUBE loads of vids on there. Pumps. Air Arms Mags. Have a look on the Air Arms Owner forum for tips. Quote Link to comment Share on other sites More sharing options...
Bobba Posted February 3, 2014 Report Share Posted February 3, 2014 I know nothing about the S200 conversion kit but my comment is based on owning an AA s410 which has had an indexing problem from time to time. On the 410 the indexing is by a little copper strip which rises as you pull back the bolt. As it rises it locks into one of the notches in the side of the rotary magazine and rotates it one position. To work effectively the strip must be at right angles to the movement. Sometimes through use the strip points slightly downwards and doesn't index sufficiently. All I do is with a narrow long nosed pair of pliers I gently bend the strip back to a right angle. If the S200 conversion works in a similar fashion then you could try tweaking the indexing strip. Good luck. Quote Link to comment Share on other sites More sharing options...
secretagentmole Posted February 3, 2014 Report Share Posted February 3, 2014 There is also a spring that attaches to the indexing paddle on the S200, those are known to go. As for pumps, read this, watch the video, try again and see if it works! http://www.pyramydair.com/article/Using_a_hand_pump_May_2006/30 Quote Link to comment Share on other sites More sharing options...
NIGHT SEARCHER Posted February 3, 2014 Report Share Posted February 3, 2014 www.airgunpellet.co.uk. They are selling new Webley Tri-filter 3 stage 250 Bar hand pumps. £109.96. Not a bad price for a 3 x filter pump. I prefer using my Air Cylinders. Just getting to old for filling 232 bar by hand. The S200 has a totally different Magazine System than the S410. It doesn`t have the indexing copper strip that fails. Have a look at www.gunspares.co.uk For and Exploded view of the S200. And Mags. Quote Link to comment Share on other sites More sharing options...
snarepeg Posted February 3, 2014 Report Share Posted February 3, 2014 If you remove the conversion, In the bottom of your system is an Allen stud for fine tuning, this could be out of tune, turn in or out to try it? John Quote Link to comment Share on other sites More sharing options...
magpieman Posted February 3, 2014 Author Report Share Posted February 3, 2014 =) thank you guys , ive managed to get the indexing sorted after a fair bit of tweaking around, the pump i have been reliably informed, is fxxked, bad karma to the dude that sold me it =/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.