FeatheredFriend Posted June 22, 2015 Report Share Posted June 22, 2015 Hi All, I wondered where those of you who are lucky enough to get your hands on an old Spanish side-by-side would get your firing pins from? The gun was fired empty and the pin broke. Any tips will be readily received and acted on!!! Many Ta's Craig Quote Link to comment Share on other sites More sharing options...
Jay_Russell Posted June 22, 2015 Report Share Posted June 22, 2015 My local gunnsmith will make them if there unavailable. Im sure he isnt the only one Quote Link to comment Share on other sites More sharing options...
sishyplops Posted June 22, 2015 Report Share Posted June 22, 2015 Philip Webster gunsmiths made one for my ugartechea for £26! That included fitting it Quote Link to comment Share on other sites More sharing options...
Gordon R Posted June 22, 2015 Report Share Posted June 22, 2015 https://www.peterdyson.co.uk/acatalog/FIRING_PINS.html £10 Quote Link to comment Share on other sites More sharing options...
Gunman Posted June 25, 2015 Report Share Posted June 25, 2015 (edited) Are they disc set or hammers with striker ends ? If discs can you get the discs out without damage ? If hammer strikers then you can not just replace the striker and will need to be fabricated on to the hammer body . Are they disc set or hammer strikers ? if discs can you get them out without damage ? AyA strikers will fit a lot of other makes so worth a look . I would think any decent gun shop will have them on stock. Edited June 25, 2015 by Gunman Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.