ditchman Posted May 14, 2016 Report Share Posted May 14, 2016 did you get some of that jointing mastic strip..............now you are putting it back together ? Quote Link to comment Share on other sites More sharing options...
viking Posted May 14, 2016 Author Report Share Posted May 14, 2016 Is this the stuff Quote Link to comment Share on other sites More sharing options...
viking Posted May 14, 2016 Author Report Share Posted May 14, 2016 I should also add that some times with my photos I do edit them a bit to make them look a bit better witch can distort colours. This picture is how it was when I took the photo. Rear bulk head was the original and seat base is new. Quote Link to comment Share on other sites More sharing options...
la bala Posted May 14, 2016 Report Share Posted May 14, 2016 It will look fine mate , crack on Quote Link to comment Share on other sites More sharing options...
viking Posted May 14, 2016 Author Report Share Posted May 14, 2016 That's what I told my mate. It will be what it will be. Brown. Quote Link to comment Share on other sites More sharing options...
la bala Posted May 14, 2016 Report Share Posted May 14, 2016 That's what I told my mate. It will be what it will be. Brown. Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 14, 2016 Report Share Posted May 14, 2016 it looks as if the old colour has faded................the new colour looks better Quote Link to comment Share on other sites More sharing options...
viking Posted May 14, 2016 Author Report Share Posted May 14, 2016 It looks good anyway so it's no worries for me. Cheers chaps Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted May 14, 2016 Report Share Posted May 14, 2016 You are going to need carpet slippers for those pedals mate to make you you don't get them dirty. Quote Link to comment Share on other sites More sharing options...
viking Posted May 14, 2016 Author Report Share Posted May 14, 2016 Got a new set of rubbers for them. Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted May 14, 2016 Report Share Posted May 14, 2016 Rubber up before you go in that's a plan Quote Link to comment Share on other sites More sharing options...
viking Posted May 14, 2016 Author Report Share Posted May 14, 2016 Always Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted May 15, 2016 Report Share Posted May 15, 2016 Doh - mines in for paint next week and I forgot to order a new rad panel. Guess I will be paying through the nose to get one. Another Land Rover (wallet emptying) experience. Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 well today i got something out that iv not had out for 8 months, (no not that) the dash, its been at the back of the garage all this time and i had no idea what it was like really and iv not even wanted to look just in case it was battered, but the time has come where it had to be done, and iv quite pleased with most of it, the top bit is fine, just the metal bit of it needs sanding down and painting, (lots of photos will follow shortly) the bottom bit might need recovering and its a bit beggered at the bottom, clocks and clock panel are all ok, iv taken the bezels seals and glass out of the clocks and will buy the new kits for them at £16 each as the insides are as you would expect like new, i cleaned up what i could but only a quick job to see what they would come up like, all in all im pleased Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 dash before . . . . Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 dash after, well most of it . . . . . . . Quote Link to comment Share on other sites More sharing options...
la bala Posted May 15, 2016 Report Share Posted May 15, 2016 Hope you have remembered where the wires go viking, i see they are not labled Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 this belongs under the clocks attached to the dash,needed rubbing down and painting, forgot the picture of it sanded down . Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 (edited) and last but not least, the clocks. before . . . . . Edited May 15, 2016 by viking Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 clocks after Quote Link to comment Share on other sites More sharing options...
la bala Posted May 15, 2016 Report Share Posted May 15, 2016 Dont lose that wash wipe switch, last one i put in came out nearly 40 quid Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 and when i get my new bezel, glass and seal kit i hope they will look like this Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 15, 2016 Report Share Posted May 15, 2016 i squirt wd40 on my vynl dash....keeps it black and "live".......... Quote Link to comment Share on other sites More sharing options...
viking Posted May 15, 2016 Author Report Share Posted May 15, 2016 i squirt wd40 on my vynl dash....keeps it black and "live".......... i was wondering what to clean it with, Hope you have remembered where the wires go viking, i see they are not labled i have a man for that Dont lose that wash wipe switch, last one i put in came out nearly 40 quidi wont i wont mate Quote Link to comment Share on other sites More sharing options...
Fuji Shooter Posted May 15, 2016 Report Share Posted May 15, 2016 Hey Viking, how easy was it to remove the Radiator panel? Did you remove the lights and cup holders first? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.