rallyrus Posted December 3, 2015 Report Share Posted December 3, 2015 Hi all, I have bought some 100gr noslers to try in my swede for fox. Nosler have the coal at 3.025" which has the bullet seated around 4mm into the neck, I have read as a rule the bullet should be seated a minimum of its diameter, so 6.5mm Has anyone loaded this bullet and if so what coal did you use??? Quote Link to comment Share on other sites More sharing options...
hakapiken Posted December 4, 2015 Report Share Posted December 4, 2015 In my experience a100 gr bullet needs to be set to COL 71-72mm. Otherwise you will have dirty shells. For 100 gr bullets I use Vihtavouri N140. Quote Link to comment Share on other sites More sharing options...
Underdog Posted December 4, 2015 Report Share Posted December 4, 2015 My favourite coal is homefire lol :-) Quote Link to comment Share on other sites More sharing options...
hawkeye Posted December 7, 2015 Report Share Posted December 7, 2015 UD prefer gas myself Quote Link to comment Share on other sites More sharing options...
aister Posted December 7, 2015 Report Share Posted December 7, 2015 The recipe I use with this bullet is, Winchester brass, Winchester primer, 48.5gr H414, COL 2.950. Quote Link to comment Share on other sites More sharing options...
kent Posted December 10, 2015 Report Share Posted December 10, 2015 Hi all, I have bought some 100gr noslers to try in my swede for fox. Nosler have the coal at 3.025" which has the bullet seated around 4mm into the neck, I have read as a rule the bullet should be seated a minimum of its diameter, so 6.5mm Has anyone loaded this bullet and if so what coal did you use??? Go with a calibre deep then work it out but frankly if you turn any preconceptions off you are highly unlikely to find a difference of any note at up to 300 yards in a factory cut chamber Getting everything straight is way more important. Touching or worse jamming into the rifling can lead to pressure spikes so just take care that doesn't occur no matter what your loading Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.