Salop Matt Posted January 19, 2016 Report Share Posted January 19, 2016 Folks do any of you with the T-series lights or NM etc use an anti spill tube to reduce the spilt light ? ATB Matt Quote Link to comment Share on other sites More sharing options...
FalconFN Posted January 19, 2016 Report Share Posted January 19, 2016 Does your not have a blacked out area around the led? I believe that reduces the spill. Quote Link to comment Share on other sites More sharing options...
rangey Posted January 19, 2016 Report Share Posted January 19, 2016 I use a strip of plastic of a spray can lid and tape it on with black electrical tape about 1/4 inch pround.I do this on all my t-series...doesn't need it on the nm800... Quote Link to comment Share on other sites More sharing options...
Dave-G Posted January 20, 2016 Report Share Posted January 20, 2016 Turn the black retainer upside down so the chamfer doesn't cause as much reflection. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 20, 2016 Report Share Posted January 20, 2016 hello, i use a black permanent marker on the reflector but careful not to touch led, my T38 has a flat bezel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.