pestcontrol1 Posted February 14, 2016 Report Share Posted February 14, 2016 Hi all i am looking for a 2" 410 recipe as i can"t find much about anywhere any help will be great Cheers PC1 Quote Link to comment Share on other sites More sharing options...
Underdog Posted February 15, 2016 Report Share Posted February 15, 2016 I use 2" cases I have but put 1/2oz in them. I use an appropriate amount of H110. Is it a two inch gun? Quote Link to comment Share on other sites More sharing options...
kent Posted February 15, 2016 Report Share Posted February 15, 2016 Interesting. I looked in my small bore manual and there is a stack of weird loads in it but not one 2" among them Can see such a thing being handy for some jobs even thought of some myself for around buildings and traps Correct me if I am wrong but if you work off less shot is less pressure could you not work down a published longer load in perfect safety looking for best fit and pattern for what you want? Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted February 15, 2016 Author Report Share Posted February 15, 2016 Hi Kent No the gun is 3" bit its more of a load for rats at close range in timber and tin sheds all i can find is a c&g load for a 65mm but it no were near fits and plenty of 3" loads that smash the sheds up to much. I have been using Eley 2" but have ran out now i din"t think it would be to hard to find a 2" recipe but it looks like i may have to just have a play till i get it somewhere near what i want Quote Link to comment Share on other sites More sharing options...
deershooter Posted February 15, 2016 Report Share Posted February 15, 2016 Stolen from Cookoff013 gm3 0.5grams, 7.7grains per 9gram cartridge, 2000 loads per kilo of powder. same again for A1, 0.5grams, 7.7grains per 9gram cartridge, 2000 loads per kilo of powder. 0.6gram tecna-n- 12 grams of shot, 1667 cartridges per kilo 0.65gram tecna-n 17 grams shot 1538 cartridges per kilo thats the difference between the powders. 2000 cartridges is a lot per kg, but not if its a severely limp cartridge. sp3, drives 1/2 shot to 5/8oz shot.... why limit yourself? Edited by cookoff013, 13 August 2011 - 05:32 PM. -please verify, any loading data Quote Link to comment Share on other sites More sharing options...
kent Posted February 15, 2016 Report Share Posted February 15, 2016 Hi Kent No the gun is 3" bit its more of a load for rats at close range in timber and tin sheds all i can find is a c&g load for a 65mm but it no were near fits and plenty of 3" loads that smash the sheds up to much. I have been using Eley 2" but have ran out now i din"t think it would be to hard to find a 2" recipe but it looks like i may have to just have a play till i get it somewhere near what i want That's what I was thinking Quote Link to comment Share on other sites More sharing options...
rws-89 Posted February 15, 2016 Report Share Posted February 15, 2016 50mm PT CX50 13.0/0.84 SP3 Gualandi Micro H-17 2.4mm 5/16oz-9g 1060 1015/309 850/259 Card+RTO 330.70 107 50mm PT CX50 14.5/0.94 SP3 Gualandi Micro H-17 2.4mm 5/16oz-9g 1134 1085/331 901/275 Card+RTO 524.60 107 50mm PT CX50 13.0/0.84 SP3 ½ of a 15mm Fibre Wad [sub-sonic] 2.4mm 5/16oz-9g 939 902/275 735/224 Card+RTO 271.20 107 50mm PT CX50 14.5/0.94 SP3 ½ of a 15mm Fibre Wad [sub-sonic] 2.4mm 5/16oz-9g 1008 964/294 780/238 Card+RTO 349.85 107 50mm PT CX50 16.0/1.04 SP3 ½ of a 15mm Fibre Wad 2.4mm 5/16oz-9g 1075 1031/314 828/252 Card+RTO 451.30 107 Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted February 15, 2016 Author Report Share Posted February 15, 2016 Stolen from Cookoff013 gm3 0.5grams, 7.7grains per 9gram cartridge, 2000 loads per kilo of powder. same again for A1, 0.5grams, 7.7grains per 9gram cartridge, 2000 loads per kilo of powder. 0.6gram tecna-n- 12 grams of shot, 1667 cartridges per kilo 0.65gram tecna-n 17 grams shot 1538 cartridges per kilo thats the difference between the powders. 2000 cartridges is a lot per kg, but not if its a severely limp cartridge. sp3, drives 1/2 shot to 5/8oz shot.... why limit yourself? Edited by cookoff013, 13 August 2011 - 05:32 PM. -please verify, any loading data Cheers chaps Thats spot on Deershooter the Tecna-n loads are they 50mm ? 50mm PT CX50 13.0/0.84 SP3 Gualandi Micro H-17 2.4mm 5/16oz-9g 1060 1015/309 850/259 Card+RTO 330.70 107 50mm PT CX50 14.5/0.94 SP3 Gualandi Micro H-17 2.4mm 5/16oz-9g 1134 1085/331 901/275 Card+RTO 524.60 107 50mm PT CX50 13.0/0.84 SP3 ½ of a 15mm Fibre Wad [sub-sonic] 2.4mm 5/16oz-9g 939 902/275 735/224 Card+RTO 271.20 107 50mm PT CX50 14.5/0.94 SP3 ½ of a 15mm Fibre Wad [sub-sonic] 2.4mm 5/16oz-9g 1008 964/294 780/238 Card+RTO 349.85 107 50mm PT CX50 16.0/1.04 SP3 ½ of a 15mm Fibre Wad 2.4mm 5/16oz-9g 1075 1031/314 828/252 Card+RTO 451.30 107 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.