FalconFN Posted February 18, 2016 Report Share Posted February 18, 2016 Does anyone know of any recoil pads that are flexible enough to fit a curved stock? Ideally it needs to be 1" deep too, I don't want to chop the stock if I can help it. Quote Link to comment Share on other sites More sharing options...
Harry136 Posted February 18, 2016 Report Share Posted February 18, 2016 To be honest, chopping the stock doesn't reduce the sale value. I did my Lincoln 20g in 2 hrs. All you need is a Tenon saw and some sand paper. Quote Link to comment Share on other sites More sharing options...
Old Boggy Posted February 19, 2016 Report Share Posted February 19, 2016 Hi Pete, Have a look at the ones sold by Avalon Guns called Cervallati which are meant to be flexible but not sure how flexible. Quote Link to comment Share on other sites More sharing options...
FalconFN Posted February 19, 2016 Author Report Share Posted February 19, 2016 Thanks Chris, they look perfect, and very reasonable priced. I found a bargain replacement forend for the badly damaged one on my O/U, it came with a stock too and both are much nicer bits of walnut than what is on there so I'm refinishing them and will use both, hence the need for the pad. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted February 19, 2016 Report Share Posted February 19, 2016 Very few are that flexible, personally I'd straighten it off, but if must bend a pad I've had good success before with an isis pad, speak to them they made me a couple with thinner plastic backers so they would bend more easily. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.