kingo15 Posted February 4, 2017 Report Share Posted February 4, 2017 I would leave it as is and use fibre wad. It would be like shooting 1/4 and 1/2 in plastic At least until you was 100% sure it's what you want to do This is the way forward and by far the cheapest option. Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted February 4, 2017 Report Share Posted February 4, 2017 No offence taken whatsoever me old China - but most Guns have a choke around 2" long so 1/2" cut is about where I would go, but if the OP is worried then try 1/4" cuts - simple, cheap and effective, as for barrel length - that's up to the OP to decide if he can live with having a few cm's less than other men Quote Link to comment Share on other sites More sharing options...
Gunman Posted February 4, 2017 Report Share Posted February 4, 2017 This is a good way of ruining any value the gun may have . Penny pinching is one thing but vandalism is another . Quote Link to comment Share on other sites More sharing options...
motty Posted February 5, 2017 Report Share Posted February 5, 2017 As I said before, just use the gun as it is. Quote Link to comment Share on other sites More sharing options...
gaffertoo Posted February 6, 2017 Report Share Posted February 6, 2017 Adjustable reamer off ebay, probabley about £12. you wont get it done cheaper than that. Hi to that man,I have done this on a .410 and worked lovely years ago with this mind what size would need for a12g ta,pops Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.