Goldfish Posted July 15, 2007 Report Share Posted July 15, 2007 I have shot for many years and am use to target annie triggers before anyone asks Just fitted 1.25lb springs and sleeves from Brooks kits to my 3 CZs and floated the barrels, then as if by magic it stoped thundering and blowing a gail so I went out to check all was ok. My god :thumbs: Dont dither do it, I couldnt fault the guns, then I did these changes Quote Link to comment Share on other sites More sharing options...
shaun4860 Posted July 16, 2007 Report Share Posted July 16, 2007 did it to mine....amazing the difference.... Quote Link to comment Share on other sites More sharing options...
dunganick Posted July 16, 2007 Report Share Posted July 16, 2007 check that when u slam the bolt or take the safety off it dosent set the gun off. Quote Link to comment Share on other sites More sharing options...
A Sick Old Man Posted July 16, 2007 Report Share Posted July 16, 2007 I had a very sensetive trigger on my BRNO 4, the spring was as light as a biro spring, operating the safety would set it off, I have fitted the intermediate one and its now fine. Great that you have done the trigger, it makes the rifle so much more user friendly. Quote Link to comment Share on other sites More sharing options...
Guest rabgoat Posted July 17, 2007 Report Share Posted July 17, 2007 I Fitted the 2lb spring and no tubes don't like it too light for out and about Quote Link to comment Share on other sites More sharing options...
hwr Posted July 18, 2007 Report Share Posted July 18, 2007 CZ 452 .17 HMR where's the cheapest place to get the brooks spring kit?(ok I'll do a search) My gun shop was telling me that the cz comes with a floating barrel, is this true but its worth doing minor adjustments to the factory finish anyway? Are the triggers adjustable ( I realise that the adjustment would be still coarse and generally considered too strong) picking my gun up on Sat H Quote Link to comment Share on other sites More sharing options...
pin Posted July 18, 2007 Report Share Posted July 18, 2007 www.cz452.com or rimefiremagic.co.uk (though last time I checked the first wasn't contactable and the second had no stock from the first) The 452 doesn't have an adjustable trigger, the 453 does though. Quote Link to comment Share on other sites More sharing options...
Soulboy Posted July 18, 2007 Report Share Posted July 18, 2007 CZ 452 does have adustment for pull (its in the CZ handbook that comes with the gun),but its not worth jack. Fit a brookes kit that transforms it. Quote Link to comment Share on other sites More sharing options...
hwr Posted July 19, 2007 Report Share Posted July 19, 2007 Thanks for the replies Brookes it is then couldnt find a 453 in this country any body any comments on the floating barrel bit? H Quote Link to comment Share on other sites More sharing options...
Soulboy Posted July 19, 2007 Report Share Posted July 19, 2007 If its a 452 Varmint,mine has a single screw/lug in the forend,just make sure you can slide a business card down to it freely. Quote Link to comment Share on other sites More sharing options...
hwr Posted July 20, 2007 Report Share Posted July 20, 2007 Went for the american but will attempt the same as I guess it is similar (if not identical) in design ( yeah I know they are different but you get my drift. Thanks H Quote Link to comment Share on other sites More sharing options...
Goldfish Posted July 21, 2007 Author Report Share Posted July 21, 2007 Went for the american but will attempt the same as I guess it is similar (if not identical) in design ( yeah I know they are different but you get my drift.Thanks H Im local to you if you need advice, the barrel is floated but may need an extra mm off the hollow for the barrel, then seal with a quick spray of clear cellulose lacquer. The trigger kit is easy to fit just put a blob of Loctite 243 on the ends of the pins. Give the bolt a good work and do a mallet test on the butt to confirm it wont discharge through shock Im sure if I had a mallet test on the butt I would discharge through shock . Quote Link to comment Share on other sites More sharing options...
tulkyuk Posted July 21, 2007 Report Share Posted July 21, 2007 has anybody got any of spare springs, pins etc from thier trigger kits left, i would like to try 1 on my 452 - would be happy to pay for it and postage of course. Quote Link to comment Share on other sites More sharing options...
shaun4860 Posted July 21, 2007 Report Share Posted July 21, 2007 has anybody got any of spare springs, pins etc from thier trigger kits left, i would like to try 1 on my 452 - would be happy to pay for it and postage of course. you have pm.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.