quentyn Posted January 3, 2019 Report Share Posted January 3, 2019 I have a beretta silver pigeon that I had hushpowered. I couldnt hit the side of a barn with it till i popped to H&H for a fitting afternoon and discovered that 1, its a slight LH cast 2, its shooting low Any hoo some electrical tape and a cartridge box or 3 and it was shooting dead on target. I was advised to swap the cartridge box for a beretta No3 gel pad which i did. Gun now shoots sweetly I really dont like the look or feel of the beretta gel pad and I wonder what my options are to get the stock modified in a more permanent way ? the gun is not a looker as the stock was always quite plain ( i bought the cheapest donor gun i could) but i want to get the comb raised in line with the gel pad ( which keeps peeling off). Can anyone outline the options ? Q Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted January 3, 2019 Report Share Posted January 3, 2019 Raised cheek piece Quote Link to comment Share on other sites More sharing options...
quentyn Posted January 3, 2019 Author Report Share Posted January 3, 2019 ooh that i like... i tried to put a red dot on my mossberg but just couldnt get on with it is that home made ? how is it put on ? Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted January 3, 2019 Report Share Posted January 3, 2019 Yep just added a raised piece of timber to the stock with some bolts. Cut the top off the stock first though Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted January 6, 2019 Report Share Posted January 6, 2019 On 03/01/2019 at 21:48, Ultrastu said: Yep just added a raised piece of timber to the stock with some bolts. Cut the top off the stock first though That's some suspicious looking leaves there 😅 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.