Cheesefiend Posted January 4, 2019 Report Share Posted January 4, 2019 Hi all, I’m still after a bolt in usable condition to replace my knackered AL391 one below (two feet snapped off, big crack running through). From what I can gather it seems that any bolt from Beretta 301, 302, 303, 390, 391 & AL2 semis should also fit. If anybody has something suitable please let me know. GMK want £250 for a new one with a non-committal delivery date so that’s out of the question. Link to comment Share on other sites More sharing options...
hawkfanz Posted January 4, 2019 Report Share Posted January 4, 2019 go direct to beretta italy,i did when i lost the handle from my a300,gmk wouldn,t even deal with me,took 2 days from italy. Link to comment Share on other sites More sharing options...
Cheesefiend Posted January 4, 2019 Author Report Share Posted January 4, 2019 7 minutes ago, hawkfanz said: go direct to beretta italy,i did when i lost the handle from my a300,gmk wouldn,t even deal with me,took 2 days from italy. Tried that already but unfortunately they say it’s a firearms part rather than spares or accessories and thus can only be ordered by firearms dealers. I’ve ordered firing pins, springs etc from them before and that’s fine, but a solid block of metal is a no-no apparently. Link to comment Share on other sites More sharing options...
Westley Posted January 4, 2019 Report Share Posted January 4, 2019 Would it be worthwhile looking for an early but rough Beretta 300 series and removing the required part. Strip, oil and tidy up woodwork then sell that as a separate item, along with the other bits. You could recover most of the cost. Link to comment Share on other sites More sharing options...
Tony Morris Posted January 4, 2019 Report Share Posted January 4, 2019 7 hours ago, Cheesefiend said: Hi all, I’m still after a bolt in usable condition to replace my knackered AL391 one below (two feet snapped off, big crack running through). From what I can gather it seems that any bolt from Beretta 301, 302, 303, 390, 391 & AL2 semis should also fit. If anybody has something suitable please let me know. GMK want £250 for a new one with a non-committal delivery date so that’s out of the question. On Guntrader there is a 301 advertised in Cornwall for £100 from a private seller: SELLER Type:Private Name:Stephen Address:Redruth, Cornwall Tel:07876-340 630 Could be worth a look if you are sure the bolt will fit. Tony Morris. Link to comment Share on other sites More sharing options...
Cheesefiend Posted January 4, 2019 Author Report Share Posted January 4, 2019 Thanks for all the replies gents. I didn’t even think of parting out a donor gun to recoup some of the cost, but it makes sense. Well spotted on the cheap 301. It’s a shame it’s far away but I’ve got in touch with the seller and hopefully things work out. Link to comment Share on other sites More sharing options...
Tony Morris Posted January 4, 2019 Report Share Posted January 4, 2019 23 minutes ago, Cheesefiend said: Thanks for all the replies gents. I didn’t even think of parting out a donor gun to recoup some of the cost, but it makes sense. Well spotted on the cheap 301. It’s a shame it’s far away but I’ve got in touch with the seller and hopefully things work out. Please let me know if you do not buy it? Had I seen it before seeing your wanted advert I would have tried to buy it myself for spare parts. Regards, Tony Morris. Link to comment Share on other sites More sharing options...
Cheesefiend Posted January 5, 2019 Author Report Share Posted January 5, 2019 (edited) 14 hours ago, Tony Morris said: Please let me know if you do not buy it? Had I seen it before seeing your wanted advert I would have tried to buy it myself for spare parts. Regards, Tony Morris. I’ve not heard back from the seller yet, but I would be more than happy to go halves on it with you as I only need that one bit. Where abouts are you based? The seller is a 6 hour round trip from me so awkward to collect. EDIT: the gun has already been sold Edited January 5, 2019 by Cheesefiend Link to comment Share on other sites More sharing options...
WelshAndy Posted January 6, 2019 Report Share Posted January 6, 2019 Any of these any good? Link to comment Share on other sites More sharing options...
Cheesefiend Posted January 6, 2019 Author Report Share Posted January 6, 2019 5 hours ago, WelshAndy said: Any of these any good? Unfortunately not, but thanks anyway for flagging it up. I need part #63 Link to comment Share on other sites More sharing options...
Recommended Posts