Croohur Posted June 25, 2019 Report Share Posted June 25, 2019 11 minutes ago, Miroku_Dave said: Hi mate, there’s a company called Ground Flat Stock Knife supplies in Bedale, North Yorkshire. They have all sorts of bolts, screws, pins etc. I’ve been using carbon fibre pins for a while that I really like however in the past I’ve used steel for the in-trays at work, a redundant screwdriver, a brass drift, all sorts really. You can drill the blanks fairly easily (as long as you keep the drill speed low!) you’ll need some epoxy as well, GFS stock it but I’ve seen guys use gorilla glue epoxy or any other two part mixture would work. Im a master of saving money so I’ll use all sorts 🤣 Fantastic, thanks for that - going to have a dive into that website now.... Quote Link to comment Share on other sites More sharing options...
Miroku_Dave Posted June 25, 2019 Author Report Share Posted June 25, 2019 This is another ‘blank’ from them, they’re great to practice handles with 👍 Quote Link to comment Share on other sites More sharing options...
Croohur Posted June 25, 2019 Report Share Posted June 25, 2019 4 minutes ago, Miroku_Dave said: This is another ‘blank’ from them, they’re great to practice handles with 👍 Really, really nice!!!! Was just looking at those mosaic pins on the website and thinking "I wonder what they look like on a handle?"! Quote Link to comment Share on other sites More sharing options...
Miroku_Dave Posted June 25, 2019 Author Report Share Posted June 25, 2019 1 minute ago, Croohur said: Really, really nice!!!! Was just looking at those mosaic pins on the website and thinking "I wonder what they look like on a handle?"! If you’re wanting to do a lanyard hole I would just get a length of brass tube from B&Q, I bought a metre length for about a fiver that should do loads of knives! Quote Link to comment Share on other sites More sharing options...
Harnser Posted June 25, 2019 Report Share Posted June 25, 2019 Absolutely super ,another master knife maker on the forum . harnser Quote Link to comment Share on other sites More sharing options...
Miroku_Dave Posted June 25, 2019 Author Report Share Posted June 25, 2019 I’ve finished this one tonight 😎🔪👍 It’s 8670 steel, heat treated and tempered. Full flat grind and hand sanded to 2500 grit. Mosaic pins with a carbon fibre lanyard hole and a G10 handle sanded to 1000 grit. Sharp as a razor! Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted June 25, 2019 Report Share Posted June 25, 2019 Stunning looking knifes 👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.