chrislightning Posted August 20, 2019 Report Share Posted August 20, 2019 I’m wondering if anyone can help, I’ve got an old Beretta A303 and while I’ve been shooting the pin that sits above the trigger has been working loose. Is there anything I can do to get it tight or do I need to take it to the gunsmith for such work? Quote Link to comment Share on other sites More sharing options...
ditchman Posted August 20, 2019 Report Share Posted August 20, 2019 im not sure....but is it held in position with a simple "o" ring......im sure someone will be along shortly.... Quote Link to comment Share on other sites More sharing options...
English Posted August 21, 2019 Report Share Posted August 21, 2019 Put this on an anvil/vice or something very solid and hit the end of it with a hammer, it will "bruise" the pin, this will create friction when put it in place this will then hold tight. Or get another pin. Quote Link to comment Share on other sites More sharing options...
matgriff Posted August 21, 2019 Report Share Posted August 21, 2019 The same pin on my old A301 broke last year, I ordered a new one, cost about £5. The pin has two small groves, one at each end that hold it in place when you tap it in. I found the new pin was a much more snuggy fit that the old one. Try a new pin first. Quote Link to comment Share on other sites More sharing options...
chrislightning Posted August 21, 2019 Author Report Share Posted August 21, 2019 Thanks guys, I’ll order a pin now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.