7daysinaweek Posted April 20, 2020 Report Share Posted April 20, 2020 (edited) Treated myself to a new PARD nv008 and I mounted it on my CZ452 , the problem I am having is when I move the bolt forward and when it is lifted it just comes into contact with the mount rail it was supplied with. I can move the bolt back and forth and close it, is just a little awkward. I cannot move the unit any further forward on the first part of the breech as it is as far forward as possible. If I move it forward so it mounts to the pre breech mount and the forward mounting area it is too far forward for eye relief. I have not fully fitted and have only put it on as a preliminary check. Having looked at some Tubeyou content and still wanting, I wanted to ask if anyone had had similar problems and how they rectified them ? Any tips on setting up ? This is going on the 22 rimfire as a dedicated night use for mainly rats and the odd Bunter. Also can the knowledgeable amongst us recommend a budget handheld digital spotter, not looking at spending a million pound. Oh and the gun was fully safe for pics. Many thanks 7diaw Edited April 20, 2020 by 7daysinaweek Quote Link to comment Share on other sites More sharing options...
bang bang birdy Posted April 20, 2020 Report Share Posted April 20, 2020 Ive fitted one to my 452, but I used a picitinny rail. So it sits a bit higher and you can get it further back to get proper eye relief Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted April 20, 2020 Report Share Posted April 20, 2020 hello, some people are using an adapter from Ant supplies, dovetail to picatinney, there is a post on the UK night vision forum Quote Link to comment Share on other sites More sharing options...
simon1979 Posted April 20, 2020 Report Share Posted April 20, 2020 Hi there, I also have one a 452, but again on a pic rail, still close though Quote Link to comment Share on other sites More sharing options...
7daysinaweek Posted April 20, 2020 Author Report Share Posted April 20, 2020 Thank you all, I will have a look at a picitinny rail. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.