BinaryB Posted August 7, 2021 Report Share Posted August 7, 2021 Dear all Not sure if anyone else has experienced issues with reassembly of an Armsan A612 but if you have and you have any ideas or tips on resembling with ease any and all comments appreciated. This is the second time I’ve had this issue and on attempting to reassemble into battery the action is completely locked up. The barrel is approximately 5mm from being securely in battery but the action is now locked. Would welcome any comments from the experienced. many thanks Quote Link to comment Share on other sites More sharing options...
Gordon R Posted August 7, 2021 Report Share Posted August 7, 2021 I assume by battery you mean the receiver. When re-assembling make sure that the cocking lever is held fully back. Quote Link to comment Share on other sites More sharing options...
Lowrie59 Posted August 10, 2021 Report Share Posted August 10, 2021 Yes make sure you pull the cocking handle back as you insert the barrel..I you look on you tube there is a few videos of the gun being strippe and reassembled Quote Link to comment Share on other sites More sharing options...
wigeon jim Posted August 13, 2021 Report Share Posted August 13, 2021 As you insert the barrel slowly pull the bolt back at the same time,👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.