Shotkam Posted August 18, 2021 Report Share Posted August 18, 2021 I have been told that you cannot load using FIBRE WADS on a progressive machine, as 3 components are needed instead of the one plaswad. Is this actually correct or is there a way around this? Quote Link to comment Share on other sites More sharing options...
Stonepark Posted August 18, 2021 Report Share Posted August 18, 2021 I hot glue Over Powder Card to Wad if I using machine so it is one component but even still is sometimes fidally to push down.., don't know what the 3rd component is. Quote Link to comment Share on other sites More sharing options...
dipper Posted August 19, 2021 Report Share Posted August 19, 2021 Before plastic wads I glued 3 wads together .mainly because sometimes the over card wad would tilt causing a blooper.Then I read something about it affecting pattern Quote Link to comment Share on other sites More sharing options...
Guest cookoff013 Posted August 19, 2021 Report Share Posted August 19, 2021 I have a rotary. But only load plastic. I use fibre with single stage. I do use virgin components though. Quote Link to comment Share on other sites More sharing options...
Shotkam Posted August 19, 2021 Author Report Share Posted August 19, 2021 8 hours ago, dipper said: Before plastic wads I glued 3 wads together .mainly because sometimes the over card wad would tilt causing a blooper.Then I read something about it affecting pattern I like the idea of that - spot of instant glue - away you go. I will try it on the pattern plate at 20 and 40 yards and see if indeed it affects pattern. Thanks - what a great tip 😁 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.