Cornish lad Posted January 24 Report Share Posted January 24 Hi just wondering if any of you have lightened the trigger pull on a coyete ? I’ve been told that’s it’s apparently just changing a screw ?? Any suggestions/tips gratefully recieved Quote Link to comment Share on other sites More sharing options...
sportsbob Posted January 24 Report Share Posted January 24 (edited) Changing the screw reduces the travel length of the second stage and the overall feeling is much better than the original, however if you over adjust things the sears can disengage in a knock so it is important to bump test things before putting the rifle into service. Edited January 24 by sportsbob Quote Link to comment Share on other sites More sharing options...
Mice! Posted January 25 Report Share Posted January 25 Have a look at XTX videos on YouTube, there for BSA but it'll be the same. My R10 trigger was really heavy when I first got it, light as a feather now 😁 Quote Link to comment Share on other sites More sharing options...
arjimlad Posted January 25 Report Share Posted January 25 I think I have some spare screws which would fit the GAMO trigger, it is not the same as a BSA trigger. Ping me your address and I will put a couple in the post. I had to polish the end of the screw to make it smooth. Alternatively you can take off the barrel band and try the screw from that. Quote Link to comment Share on other sites More sharing options...
sportsbob Posted January 26 Report Share Posted January 26 I think the thread is M2.5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.