-
Posts
1,375 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Everything posted by miffy
-
The middle switch is wired incorrectly on the new switch. Red from top middle to the bottom where the yellow is then yellow and blue to the top 2
-
Would rather sell all together, will accept a reasonable offer for the lot.
-
Clearing out the cupboard and I have found 5 xTeague invector extended chokes which I no longer require as I sold the gun a few years ago. 2 x skeet, 1 x 1/4 (cyl), 1 x 1/2 (mod), 1 x 3/4 (I.mod) complete with a GMK choke pouch SOLD
-
Wasn't that one of the Palmers?
-
Believe it sold
-
Firearms.licensing@derbyshire.pnn.police.uk
-
Get yourself a buff http://www.buffwear.co.uk/ Works very well and cheap
-
Thanks for putting on a great day Alan! Really enjoyed shooting both rounds. Put me down for 2 on the next one
-
I've booked the room and I'm not your mum so sort that when you get there
-
About 20 miles (1/2 hr) and its on the way
-
Sparkie, you know the kids are both mine!! First at 21 Second at 22 Third at 23 Fourth at 24 plus one aborted Then I figured out what was happening and had the snip. This didn't work and I never did the test so ended up getting another one pregnant but she aborted. Had the snip done again, did the test and problem sorted.
-
Check your phone messages!
-
Happy birthday fella, hope you have a good un
-
Cheque is in the post!!
-
I can't guess what happens to the 6mm and the mcb 6mm will take upto 47 amp depending on installation method. Every installation is different, and depending on how it is installed 10mm could be rated at max 46 amp so maybe he should install 16mm cable if he wants a 10.5kw shower? Docholiday wanted to know if a 10.5kw shower could be installed using the existing 6mm cable and the answer is yes it can, even using a 50A mcb.....how is that possible?
-
Had Vivaro's for the last 4 years or so and bought a new transit MWB M roof this April and have so far done 27K with no problems at all unlike J@mes. Had mine chipped and get 36MPG. Much better van than the Vivaro by a long way
-
10.5kw shower should run on 6mm T&E with no problems on a circuit length of 8M. Manufacturers data may well require 10mm cable to be installed even for an 8.5kw shower. My only concern is should you be changing the shower in the first place :unsure:
-
didn't we pace it out at 704 yards? :yp:
-
Fox didnt need to be buried like Simons as they wanted them shot Sound mods are not a problem Stuart so there will me a few more next year Definately need a normal group next year although the "non normals" made for some interesting conversation
-
the camera has been kind to him...he looks much bigger in real life :blink:
-
Stuart you need to get things sorted for next year and hopefully we can arrange a group with no unknowns. I saw and shot nothing at all but these things happen and personally it makes not much difference to me if i shoot or not. Facts are though that i had a really good time and haven't laughed so much in ages. The new accomodation was excellent, the new shooting grounds are equally as good, saw plenty of deer and the 3 stags that passed between me and Mungler were magnificent. I spent a couple of hours up a high seat but unfortunately a poor choice of rifle scope meant i couldn't shoot despite the fact that boar were in front of me. I am already looking forward to next years trip and if i have half as much fun as i have this year then i am really not bothered if i don't shoot again.
-
Do any of you fellow PW'ers know of anyone reliable that can do a re gas on a chiller unit? The estate where the work is to be done is in the Oxford area. I have recently been let down by some guy and this job is quite urgent. The chiller is in a deer larder and has recently been installed. All the pipe work has been done so it "should" be just a re gas, but if any pipework does need to be changed then it is a couple of metres max. Payment will be cash and/ or a days stalking. Please PM any genuine and reliable contacts in that area (or willing to travel there this week)
-
Spot on mate....oh and i am registered with the appropriate trade association and could do the test if required.