Pins that accept R clips

[J@mes]

I need some pins that will accept an R clip for my camping trailer (removal lightboard and drop down tail gate) but I can't find them anywhere!

 

need to be M10 and 2 need to be 50mm long between the head and the pin hole, 2 need to be 80mm long between head and pin hole.

 

Any ideas?

 

Thanks

[-oXo-]

http://www.trailertek.com/acatalog/Body_Fittings.html

 

Everything you'll need will be on there

[J@mes]

Can't really see what I'm after on there, need something like this:

 

[bruno22rf]

Try nut/bolt suppliers-you should be able to get a 10mm bolt long enough to give you that kind of length before the thread starts-then just cut them to length and drill the hole in-shouldnt be too tricky-otherwise any engineering workshop could do it for a couple of quid.

[J@mes]

Yeh I'm probably going to visit my local machine shop on monday and see if they can spin them up on the lathe or alter some existing bolts.

[Gordon R]

Where are you in the country?

[J@mes]

sunny lincolnshire!

[gixer1]

I used coach bolts for the same thing, fitted them then buffed a flat part at the top and drilled a hole to suit the R pin...