billytheghillie Posted June 14, 2011 Report Share Posted June 14, 2011 i have a new lanber 20g and after cleaning it, i cannot get barrels back into action,as if something is stopping it. i moved top lever and stupidly pulled trigger, any suggestions before i take a trip to dealer? Quote Link to comment Share on other sites More sharing options...
stokie Posted June 14, 2011 Report Share Posted June 14, 2011 Facing forward on the action is a small button that needs to be pressed its just above firing pins at the same time as sliding the top lever over . As you do both you can feel it engage then the lever will push all the way Quote Link to comment Share on other sites More sharing options...
njc110381 Posted June 14, 2011 Report Share Posted June 14, 2011 Yep that button that stokie mentioned is the guns way of telling that the barrels are closed. You need to trick it into that setting (it can be quite hard on your finger so perhaps use a screwdriver or coin to push with) then you can pull the top lever across again. Quote Link to comment Share on other sites More sharing options...
Mungler Posted June 14, 2011 Report Share Posted June 14, 2011 Is there a strong smell of foxes or wee? Quote Link to comment Share on other sites More sharing options...
Evil Elvis Posted June 14, 2011 Report Share Posted June 14, 2011 Ahhhh the wee wee smell is the lubricant? :blink: :blink: Quote Link to comment Share on other sites More sharing options...
billytheghillie Posted June 14, 2011 Author Report Share Posted June 14, 2011 sorted boys, thanks very much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.