DeadShot Stu Posted November 9, 2006 Report Share Posted November 9, 2006 HI All, I'm looking for a new sound mod for my CZ American 17HMR, I have a SAK on it at the moment but not sure what to look at putting on it, Any suggestions??? Quote Link to comment Share on other sites More sharing options...
Axe Posted November 9, 2006 Report Share Posted November 9, 2006 I'd have stuck with the Sak by choice but the only other option for me would be the ASE Utra. Its around £55-60 and weighs alot more than the Sak but apparently its 10% quieter. Quote Link to comment Share on other sites More sharing options...
Graham M Posted November 9, 2006 Report Share Posted November 9, 2006 Stick with the SAK and save yourself £60. G.M. Quote Link to comment Share on other sites More sharing options...
al4x Posted November 9, 2006 Report Share Posted November 9, 2006 Yep stick with the sak. If you want to see what noise it nakes without the crack try firing a round into soft ground at 10 yards it'll sound like a .22lr very quiet. Its purely over distance the supersonic crack that you cannot silence. Quote Link to comment Share on other sites More sharing options...
deadeye ive Posted November 9, 2006 Report Share Posted November 9, 2006 Ear protection .........That is all these mods are when it comes to the nitty gritty .............£30 SAK mate Quote Link to comment Share on other sites More sharing options...
DeadShot Stu Posted November 9, 2006 Author Report Share Posted November 9, 2006 Thanks for that, Look's like i will have to spend me cash on other bits!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
kip270 Posted November 9, 2006 Report Share Posted November 9, 2006 After chatting to a guy a on another forum, i would go for the Parker Hale. The crown was not a good finish, so he done that then took off the SAK and tried it with the Parker Hale, and the groups have shrunk even more. All to do with the harmonics of the barrel Quote Link to comment Share on other sites More sharing options...
theshootist Posted November 12, 2006 Report Share Posted November 12, 2006 Apologies for hijacking the thread slightly, but does anyone have any experience of the dubiously named "Wildcat Growler" .17 moderator?- I have taken a look at one, it seemed very well made and I like the fact that most of the tube shrouds the barrel. I currently have a cheap webley moderator on my .17 - I'm not sure how much extra performance a wildcat would provide, but would be interested to hear if anyone has any experience of them. Many thanks Quote Link to comment Share on other sites More sharing options...
Graham M Posted November 12, 2006 Report Share Posted November 12, 2006 Apologies for hijacking the thread slightly, but does anyone have any experience of the dubiously named "Wildcat Growler" .17 moderator?- I have taken a look at one, it seemed very well made and I like the fact that most of the tube shrouds the barrel. I currently have a cheap webley moderator on my .17 - I'm not sure how much extra performance a wildcat would provide, but would be interested to hear if anyone has any experience of them. Many thanks Extremely well made, strippable to clean and quite nice to look at. http://www.the-internet-pages.co.uk/wildca...tor_rimfire.htm Bit expensive though for a rimfire. G.M. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.