bicykillgaz Posted July 16, 2013 Report Share Posted July 16, 2013 Hi Picked up a stock for my 452 varmint off another member a while back, had some accuracy consistency issues so changed mounts scopes etc but tonight realised its missing the bush that sits on the stock which the barrel lug bolt sits through/in so the bolt isn't actually securing the barrel lug. Does anyone know where I can get one or ideally if you've got a spare, I've tried the www.shop-cz.com but they font list it so I'm a big stuck. Atb Gary Quote Link to comment Share on other sites More sharing options...
jamiedenny Posted July 16, 2013 Report Share Posted July 16, 2013 Edgar bros would be your best bet I don't have a spare but happy to give measurements off mine but unless you have a mill I don't imagine they would be much help. Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 17, 2013 Author Report Share Posted July 17, 2013 Thanks mate i will give them a call today I'm guessing there not gonna fancy ripping one out of a new stock but you never know. Cheers Gary Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 20, 2013 Author Report Share Posted July 20, 2013 Emailed Edgar brothers but no reply, anyone got any other ideas or an old stock I can buy cheap to steal it out of? Quote Link to comment Share on other sites More sharing options...
rec-baller Posted July 20, 2013 Report Share Posted July 20, 2013 (edited) Edgar bros won,t deal with you directley! !! you,ll have to go through a gun shop to get the parts shaun Edited July 20, 2013 by rec-baller Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 20, 2013 Author Report Share Posted July 20, 2013 They won't sell you anything direct but I have been given a spare for a hatsan foc before when I snapped the migratory plug whilst cleaning it. There pretty good in that respect. I doubt they'll be able to help on this occasion though as its not listed as a spare on the cz website so I might be struggling. Bit pee'd off if I'm honest as it looks like I'm gonna end up having to a stock just to fix the stock I've recently bought! Quote Link to comment Share on other sites More sharing options...
Dekers Posted July 20, 2013 Report Share Posted July 20, 2013 They won't sell you anything direct but I have been given a spare for a hatsan foc before when I snapped the migratory plug whilst cleaning it. There pretty good in that respect. I doubt they'll be able to help on this occasion though as its not listed as a spare on the cz website so I might be struggling. Bit pee'd off if I'm honest as it looks like I'm gonna end up having to a stock just to fix the stock I've recently bought! Is it shown in the parts list or diagram here.... http://stevespages.com/pdf/cz_452_453.pdf If it is then it is available. The CZ spares on their site are simply a few common bits and pieces, as far as I'm aware EVERY single part of your CZ is available to order from Edgar Bros (via RFD). Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 20, 2013 Author Report Share Posted July 20, 2013 Thanks for that dekers, it looks like it could be 48 the front escutcheon, although that might be the lug it's self it's a little hard to tell on the drawing. I'll chase up Edgar's on Monday and see what they say. Atb Gary Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 20, 2013 Author Report Share Posted July 20, 2013 Just been searching and the front escutcheon is the actual barrel lug so not the bit I'm after. The bit I'm after is fixed into the stock and the head of the bolt sits in it when everything is screwed in place, preventing any movement. Atb Gary Quote Link to comment Share on other sites More sharing options...
fruitloop Posted July 22, 2013 Report Share Posted July 22, 2013 (edited) the bit you are looking for sounds like number 48 as that is the cup bit in the stock and there is no other parts Edited July 22, 2013 by fruitloop Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 22, 2013 Author Report Share Posted July 22, 2013 No mate I thought that but the front escutcheon is definitely the barrel lug, I can't find a number for the cup. Quote Link to comment Share on other sites More sharing options...
lees Posted July 22, 2013 Report Share Posted July 22, 2013 Is it just a plain bush? If Jamie can post up dimensions and what it's made off I should be able to make one at work. Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted July 22, 2013 Author Report Share Posted July 22, 2013 If you could that would be amazing. Thank you Quote Link to comment Share on other sites More sharing options...
lees Posted July 23, 2013 Report Share Posted July 23, 2013 No problem, just need the sizes Quote Link to comment Share on other sites More sharing options...
CZ550Kevlar Posted July 23, 2013 Report Share Posted July 23, 2013 Edgar's are great, I phoned their armorers once and they told me the part number to give the RFD the approximate price nod how much postage they will charge so I wouldn't get ripped off for a tiny extractor claw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.