station Posted January 22, 2014 Report Share Posted January 22, 2014 Anyone know anywhere around Cheshire (Staffs, Derby etc) that does hydro dipping on a stock? The main place is in York but that's a bit too far as I want to take a look at some examples of their work first hand. Cheers. Quote Link to comment Share on other sites More sharing options...
martyn2233 Posted January 22, 2014 Report Share Posted January 22, 2014 (edited) Try here http://www.hydroprecision.co.uk Only at Rotherham Edited January 22, 2014 by martyn2233 Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted January 22, 2014 Report Share Posted January 22, 2014 There's also one in South Wales, that shows examples of their work online. http://www.hydro-art.co.uk/ Quote Link to comment Share on other sites More sharing options...
figgy Posted January 22, 2014 Report Share Posted January 22, 2014 Be careful with your stock after its done, not the hardest wearing coating. Friend of mine had his full rifle set up dipped a few years ago, it looked fantastic but rubbed off in high wear areas and marked quite easily. Might be better and harder wearing of late. Figgy Quote Link to comment Share on other sites More sharing options...
daz2202 Posted January 22, 2014 Report Share Posted January 22, 2014 A friend of mine does this for a living. It's unbelievable the finishes and designs that he can do. He is based in kent but will do things be courior of you are interested Quote Link to comment Share on other sites More sharing options...
kent Posted January 22, 2014 Report Share Posted January 22, 2014 Anyone know anywhere around Cheshire (Staffs, Derby etc) that does hydro dipping on a stock? The main place is in York but that's a bit too far as I want to take a look at some examples of their work first hand. Cheers. Hydrographics of York have been at this for years and also work for the trade /importers. I doubt they will send out any bad work, some of their work I have seen is better than that which comes out of the big manufacturers. I have no links to anyone there by the way. It is a tad pricey to do for what it is though Quote Link to comment Share on other sites More sharing options...
station Posted January 22, 2014 Author Report Share Posted January 22, 2014 Many thanks to all for their replies - I will check out the links. ATB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.