steve_b_wales Posted February 12, 2014 Report Share Posted February 12, 2014 Is there a company that sells laminate or rubber moulded stocks for the above rifle? Quote Link to comment Share on other sites More sharing options...
Amazed Posted February 12, 2014 Report Share Posted February 12, 2014 http://www.boydsgunstocks.com/searchm.htm?type=merged&searcht=CZ+527+ Unless you want to get expensive http://www.joewestriflestocks.com/inlets.php :( poor old CZ what he doing to you ? Quote Link to comment Share on other sites More sharing options...
sixhills 69 Posted February 12, 2014 Report Share Posted February 12, 2014 Is there a company that sells laminate or rubber moulded stocks for the above rifle? Edger Brothers will get you a synthetic stock for the CZ527 for around £190 Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted February 12, 2014 Author Report Share Posted February 12, 2014 http://www.boydsgunstocks.com/searchm.htm?type=merged&searcht=CZ+527+ Unless you want to get expensive http://www.joewestriflestocks.com/inlets.php :( poor old CZ what he doing to you ? Nothing. But I'm prone to dent wooden stocks, and would like to change the original for a laminate. Quote Link to comment Share on other sites More sharing options...
mad1 Posted February 12, 2014 Report Share Posted February 12, 2014 http://www.boydsgunstocks.com/searchm.htm?type=merged&searcht=CZ+527+ Unless you want to get expensive http://www.joewestriflestocks.com/inlets.php :( poor old CZ what he doing to you ? Wow us that all they are from Boyd's ?or will I get stung by tax etc or poor fit .... ( sorry to jump on board but I like those ) Quote Link to comment Share on other sites More sharing options...
Amazed Posted February 12, 2014 Report Share Posted February 12, 2014 Wow us that all they are from Boyd's ?or will I get stung by tax etc or poor fit .... ( sorry to jump on board but I like those ) As far as I recall they are about £120 ish by the time they get here. As for fit I have no idea. Nothing. But I'm prone to dent wooden stocks, and would like to change the original for a laminate. Ye me too mate am only messing Quote Link to comment Share on other sites More sharing options...
r1steele Posted February 12, 2014 Report Share Posted February 12, 2014 Wow us that all they are from Boyd's ?or will I get stung by tax etc or poor fit .... ( sorry to jump on board but I like those ) I had one last year for $99 (Howa/Weatherby). With delivery, taxes etc it came to £136 and my barrel and action dropped in perfectly and it shoots lovely. Quote Link to comment Share on other sites More sharing options...
r1steele Posted February 12, 2014 Report Share Posted February 12, 2014 Boyds are usually a fairly safe bet, I have only had one with a slight defect out of maybe 13-15 I have handled. They are as good as factory inlets, hell, they do the factory inlets for some manufacturers they supply stocks for. £120-130 is about the going rate by the time a $99 stock gets here. Good range of colours, honest delivery times but the downside is their limited range and they are all quite short L.O.P. usually sub 14". I've never checked my L.O.P but I find it better than the Hogue stock was. Quote Link to comment Share on other sites More sharing options...
ricky green Posted February 17, 2014 Report Share Posted February 17, 2014 Have a look at richards microfit gunstocks aswell steve. Quote Link to comment Share on other sites More sharing options...
Dunkield Posted February 17, 2014 Report Share Posted February 17, 2014 You would need to plan six months ahead if you are going down the Richards route... Quote Link to comment Share on other sites More sharing options...
kent Posted February 17, 2014 Report Share Posted February 17, 2014 Nothing. But I'm prone to dent wooden stocks, and would like to change the original for a laminate. Might I suggest a proper deep hand rubbed oil finish of the existing? This way dents can be easily drawn out by steaming using a well wetted bit of thin towelling (cheapo face cloth) and heat from a stock or even electric iron. Laminates are hard and stable but also have a tendency to look rough after a good few days in the field. Summer project perhaps? Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted February 17, 2014 Author Report Share Posted February 17, 2014 I think I'll stick with the original stock. I've fitted a stock protector on it, and will cover the rest of the wood with self clinging camo tape. This should prevent most dents and knocks damaging the stock. And, I'll have to learn to be more careful. Quote Link to comment Share on other sites More sharing options...
kent Posted February 17, 2014 Report Share Posted February 17, 2014 I think I'll stick with the original stock. I've fitted a stock protector on it, and will cover the rest of the wood with self clinging camo tape. This should prevent most dents and knocks damaging the stock. And, I'll have to learn to be more careful.I generally plan on using a wood stock till it needs work then refinishing with hand rubbed oil myself. CZ wood is often far better than it seems when you have done some work on it, factory just want to get the gun shipped. You do right keeping the one you have Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.