CaptainBeaky Posted March 28, 2014 Report Share Posted March 28, 2014 I find myself in need of a couple of bits of walnut, to patch up the stock on the SKB I've just bought. First piece (most important) 3.5" long x 1/2" square minimum. Second piece (would be nice, but not absolutely vital) 7" x 2" x 1/2" Is anyone able to assist? Thanks for looking Link to comment Share on other sites More sharing options...
Gordon R Posted March 28, 2014 Report Share Posted March 28, 2014 If you are in the North West, I have a Beretta stock - I removed a couple of inches from the end, for another stock. Link to comment Share on other sites More sharing options...
Archie-fox Posted March 28, 2014 Report Share Posted March 28, 2014 Got 2 good lumps in my garage about 3ft long and as wide as 5inch in places.. Free if your local, I'm in Manchester. Link to comment Share on other sites More sharing options...
CaptainBeaky Posted March 28, 2014 Author Report Share Posted March 28, 2014 (edited) Thanks for the offers, gents - I'm actually in Kent, so a bit far to collect! I've just checked again, and I only really need the first piece. The second was to go under the recoil pad to increase LOP, and I've decided to do that with an ebonite spacer later on. The first piece is the important bit, as I need to splice in a piece where the stock meets the action. It really is offcut size - it just needs the grain running the right way (lengthwise). Gordon - do I take you to mean that you have the rest of the Beretta stock after cutting a piece off, or the piece you cut off? Sorry to act thick, but it's been a long week! Archie - that sounds like it would be a shame to cut it up Edited March 28, 2014 by CaptainBeaky Link to comment Share on other sites More sharing options...
Gordon R Posted March 28, 2014 Report Share Posted March 28, 2014 Yes - I have the rest of the stock. Link to comment Share on other sites More sharing options...
flazz Posted March 28, 2014 Report Share Posted March 28, 2014 I find myself in need of a couple of bits of walnut, to patch up the stock on the SKB I've just bought. First piece (most important) 3.5" long x 1/2" square minimum. Second piece (would be nice, but not absolutely vital) 7" x 2" x 1/2" Is anyone able to assist? Thanks for looking I've got quite a few old S/S stocks , if you pay the postage i'll send you a full stock. If Interested pm me Cheers Chris Link to comment Share on other sites More sharing options...
welshwarrior Posted March 28, 2014 Report Share Posted March 28, 2014 Post up a picture I'll see if I have an off cut that's a closeish match for grain and colour, if you cover the postage you can have it if I've something. Link to comment Share on other sites More sharing options...
Recommended Posts