Cled01 Posted April 27, 2014 Report Share Posted April 27, 2014 I have a Beretta 692 and can't for the life of me remove the ejectors to clean them. Any one out there that can help and advise on best method to remove them. Cheers Quote Link to comment Share on other sites More sharing options...
Mrcbr Posted April 27, 2014 Report Share Posted April 27, 2014 Are they same as sv 10 cos I'm having same problem lol Quote Link to comment Share on other sites More sharing options...
Tom-b Posted April 27, 2014 Report Share Posted April 27, 2014 (edited) There a bit of a fiddle to remove. You have to depress the ejector then using cranked tool, something like a small Allen key you need to pop out the adjuster (the thing with a slot for a flat headed screw driver), this is the awkward bit as you have to jiggle the adjuster to the right position to get it to slide out, it slides out towards the muzzle . Sorry for my terrible explanation but I hope it helps Edited April 27, 2014 by Tom-b Quote Link to comment Share on other sites More sharing options...
fruity Posted April 27, 2014 Report Share Posted April 27, 2014 Push the ejectors against solid , piece of wood etc Small dogleg tool required (small Allen key ) Use tool to push ejector / stop from the breech end towards the muzzle, accessed from underneath front barrel shoulder . With the ejectors under pressure and when ejector/stop has been moved upwards slightly , hold it with your finger tips , twist/wriggle to remove . The ejector will be under tension from ejector springs so release gently . Remove ejector , plunger and Spring . Quote Link to comment Share on other sites More sharing options...
Jega Posted April 27, 2014 Report Share Posted April 27, 2014 If its the same as the 682 heres a little video of the ejector removal process, Quote Link to comment Share on other sites More sharing options...
Westward Posted April 28, 2014 Report Share Posted April 28, 2014 I answered this in the guns sub forum but fruity's post above is very similar. Others may scoff but I think it's good practice with all Berettas to remove, clean and relube the ejectors every 4 or 5K shells even if they haven't got wet. Quote Link to comment Share on other sites More sharing options...
Adrian Foster Posted May 2, 2014 Report Share Posted May 2, 2014 No scoffing here - 686E - I do it every 1,000 shells - 10 min job and what harm can it do ?. Quote Link to comment Share on other sites More sharing options...
Cled01 Posted May 19, 2014 Author Report Share Posted May 19, 2014 I answered this in the guns sub forum but fruity's post above is very similar. Others may scoff but I think it's good practice with all Berettas to remove, clean and relube the ejectors every 4 or 5K shells even if they haven't got wet. Finally got round to doing it, and what an easy job, literally took 10min of my time from start to finish. Cheers guys, thanks for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.