flynny Posted June 29, 2014 Report Share Posted June 29, 2014 (edited) 1st target 1st grouping( 1"-2" high and right) 2nd target pic, after a bit of tinkering with the scope,bang on the money and 2 pulled, one left and one right (driver error!!!!) If u look at the pic with the rifle in you can just make out the white plate in the distance, 3rd telegraph post from the left , just to the left of it and ground level. https://www.dropbox.com/sh/336zntwwvp1bj0n/AADnS-{\rtf1\ansi\ansicpg1252 {\fonttbl} {\colortbl;\red255\green255\blue255;}{\rtf1\ansi\ansicpg1252https://dl-https://www.dropbox.com/sh/336zntwwvp1bj0n/AACmTSqrqvPz8StnWynsogtca/2014-06-28%2017.44.11.jpgweb.dropbox.com/get/Camera%20Uploads/2014-06-28%2017.44.11.jpg?_subject_uid=272694094&w=AABubmqhWnGUJy1fCM1-KiqGSdfJCVTDIgnsjJPfcdzDYQ {\fonttbl} {\colortbl;\red255\green255\blue255;} } }https://www.dropbox.com/sh/336zntwwvp1bj0n/AADnS-3JzpDkbPRODXk_50_ma/2014-06-28%2017.13.02.jpghttps://www.dropbox.com/sh/336zntwwvp1bj0n/AACmTSqrqvPz8StnWynsogtca/2014-06-28%2017.44.11.jpg3JzpDkbPRODXk_50_ma/2014-06-28%2017.13.02.jpghttps://www.dropbox.com/sh/336zntwwvp1bj0n/AADcVo77J6rIjujuKTy6FwgAa/2014-06-28%2017.20.40.jpg Not bad for PPU 100 grain factory ammo, if I do say so my selfhttps://www.dropbox.com/sh/336zntwwvp1bj0n/AAC_iFfRT4NWksKBlr2n9-08a/2014-06-28%2017.42.46.jpghttps://dl-web.dropbox.com/get/Camera%20Uploads/2014-06-28%2017.44.11.jpg?_subject_uid=272694094&w=AABubmqhWnGUJy1fCM1-KiqGSdfJCVTDIgnsjJPfcdzDYQ Last pic is of the cheap target rig, Flynny Edited June 29, 2014 by flynny Quote Link to comment Share on other sites More sharing options...
figgy Posted June 29, 2014 Report Share Posted June 29, 2014 Some damage to 1/2" plate one round straight through at 250yards. Figgy Quote Link to comment Share on other sites More sharing options...
camokid Posted June 30, 2014 Report Share Posted June 30, 2014 im yet to nick a steel that a 243 dont smash to bits.. it needs to be hardox but its not cheap... also the ppu rounds are fantastic i used them in my 223 and they out preformed some of the bigger brands.. Quote Link to comment Share on other sites More sharing options...
Dougy Posted June 30, 2014 Report Share Posted June 30, 2014 (edited) There you go, its a pain keep having to open these links sometimes. specially if on the pc at work I use some similar steel its 5"x 5" it sounds good when you hit it Edited June 30, 2014 by Dougy Quote Link to comment Share on other sites More sharing options...
flynny Posted June 30, 2014 Author Report Share Posted June 30, 2014 Some damage to 1/2" plate one round straight through at 250yards. Figgy im yet to nick a steel that a 243 dont smash to bits.. it needs to be hardox but its not cheap... also the ppu rounds are fantastic i used them in my 223 and they out preformed some of the bigger brands.. 243.jpg2014-06-28 17.13.02.jpg There you go, its a pain keep having to open these links sometimes. specially if on the pc at work I use some similar steel its 5"x 5" it sounds good when you hit it Cheers lads. I pick up the steel off various sites so it's free.the hole straight thru is 2 bullets in one hole. Dougy cheers mate.i ain't mastered how to put pics straight on yet mate, it takes me forever to do the Dropbox malarkey ha ha ha. At Flynny Quote Link to comment Share on other sites More sharing options...
reggiegun Posted June 30, 2014 Report Share Posted June 30, 2014 Cheers lads. I pick up the steel off various sites so it's free.the hole straight thru is 2 bullets in one hole. Dougy cheers mate.i ain't mastered how to put pics straight on yet mate, it takes me forever to do the Dropbox malarkey ha ha ha. At Flynny Just shrink your photo's with something like www.shrinkpictures.com/ Quote Link to comment Share on other sites More sharing options...
Dougy Posted June 30, 2014 Report Share Posted June 30, 2014 Try using paint editor, go to image, then resize until it's ok. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.