fielddweller Posted August 3, 2015 Report Share Posted August 3, 2015 Guys What tool is needed to remove the stock? I've tried to see down with a torch but no joy. Any help appreciated Fielddweller Quote Link to comment Share on other sites More sharing options...
Gordon R Posted August 3, 2015 Report Share Posted August 3, 2015 (edited) Normally a 6mm hex key. My 5mm came with Salvinelli - made the 6mm from an existing tool, with 6mm allen key welded on - badly. Edited August 3, 2015 by Gordon R Quote Link to comment Share on other sites More sharing options...
PegLeg Posted August 3, 2015 Report Share Posted August 3, 2015 You need a flat headed screw driver 200mm x 8mm Quote Link to comment Share on other sites More sharing options...
sishyplops Posted August 3, 2015 Report Share Posted August 3, 2015 screwdriver on miroku (modern ones anyway) Quote Link to comment Share on other sites More sharing options...
Danger-Mouse Posted August 3, 2015 Report Share Posted August 3, 2015 If it`s the same as mine a very long flathead screwdriver. Quote Link to comment Share on other sites More sharing options...
fielddweller Posted August 3, 2015 Author Report Share Posted August 3, 2015 I've poked in with a flat head but couldn't feel the screwdriver biting,the age is code is MX if that helps. Got a feeling Gordon might be some where near,why the heck they don't just use a screw driver head. Cheers Fielddweller Quote Link to comment Share on other sites More sharing options...
sishyplops Posted August 3, 2015 Report Share Posted August 3, 2015 its a flat blade screwdriver unless someone has changed it Quote Link to comment Share on other sites More sharing options...
Gordon R Posted August 3, 2015 Report Share Posted August 3, 2015 (edited) I have owned Mirokus with hex bolt, slotted screw and hexagonal nut(with a slot in it). http://forums.pigeonwatch.co.uk/forums/topic/205517-miroku-mk38-stock-removal/ Edited August 3, 2015 by Gordon R Quote Link to comment Share on other sites More sharing options...
walt1980 Posted August 3, 2015 Report Share Posted August 3, 2015 I've got a borescope and found its really handy for having a look at those bolts on a lot of guns!! Quote Link to comment Share on other sites More sharing options...
Junkyard Dog Posted August 4, 2015 Report Share Posted August 4, 2015 Try again with the torch... 99% of Miroku's are slot head screw, if its had a browning bolt fitted it will be a 5mm allen head, have had stocks of hundreds of them and never come across anything different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.