viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 (edited) The one you have put on the rear is not a rear door lock. There is no half moon sliding lock thumb latch thingy. when i bought the set it said it was 2 front and a rear, and the rear was the same as the front N/S, i remember now, i couldnt use the old locks as there was no hole for the lock and i didnt want to start drilling. that old pic i just added may not off neen the back door lock then, i will go have a look in the garage now here you are rear door catch assembly male and female not sure i remember anything like that Edited November 23, 2016 by viking Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 it has to be one of these 2, and they both look the same Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 here you are rear door catch assembly male and female any idea what these would be called simon Quote Link to comment Share on other sites More sharing options...
ditchman Posted November 23, 2016 Report Share Posted November 23, 2016 (edited) they are called........."THE BITS YOU TOOK OFF AND PUT SOMEWHERE SAFE"............................. if you dont put them on ...when you put the spare wheel on it will rip the back door off Edited November 23, 2016 by ditchman Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 that could be the case but in this instance i dont think i did, i will go through the 93.000 photos i have and see if i can see anything Quote Link to comment Share on other sites More sharing options...
la bala Posted November 23, 2016 Report Share Posted November 23, 2016 that could be the case but in this instance i dont think i did, i will go through the 93.000 photos i have and see if i can see anything Take your time Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 were never there Quote Link to comment Share on other sites More sharing options...
ditchman Posted November 23, 2016 Report Share Posted November 23, 2016 you must put them there.....the door frame will split without it.................. Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 i will if i can find out what there called, been looking but no luck so far Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 could it be theses bits, if so iv found a couple of them, one part was £30 the other was £25, so for all the lot probably £100, thats a bit of a **** take. and how come the parts manual shows the type of lock i have, and not the one it should have, like my old ones Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 i remember months ago asking if it was worth £40 for a parts manual, and weather id need one or not dred to think where id be now if id of not got one, or how many more questions id of asked you all Quote Link to comment Share on other sites More sharing options...
ditchman Posted November 23, 2016 Report Share Posted November 23, 2016 get them from a scrappy................. Quote Link to comment Share on other sites More sharing options...
viking Posted November 23, 2016 Author Report Share Posted November 23, 2016 i will try over the road tomorrow, old lock for rear door, shot or vapor blasting? Quote Link to comment Share on other sites More sharing options...
viking Posted November 24, 2016 Author Report Share Posted November 24, 2016 (edited) . Edited November 24, 2016 by viking Quote Link to comment Share on other sites More sharing options...
viking Posted November 24, 2016 Author Report Share Posted November 24, 2016 had a little go at the lock earlier to see what it would come up like, just had ago at it with a bit of emery tape Quote Link to comment Share on other sites More sharing options...
Gordon R Posted November 24, 2016 Report Share Posted November 24, 2016 I think you missed a bit. Quote Link to comment Share on other sites More sharing options...
viking Posted November 24, 2016 Author Report Share Posted November 24, 2016 cheers Gordon, ill get that bit tomorrow Quote Link to comment Share on other sites More sharing options...
eastdevon Posted November 25, 2016 Report Share Posted November 25, 2016 Looking good!! Quote Link to comment Share on other sites More sharing options...
viking Posted November 25, 2016 Author Report Share Posted November 25, 2016 Looking good!! cheers mate got the missing floor plate screws and what nots today, and the door stay bolts Quote Link to comment Share on other sites More sharing options...
viking Posted November 25, 2016 Author Report Share Posted November 25, 2016 bolts fit a treat this time Quote Link to comment Share on other sites More sharing options...
viking Posted November 27, 2016 Author Report Share Posted November 27, 2016 first job today was glass cleaning, not been out of the box i put it in for over a year , Quote Link to comment Share on other sites More sharing options...
viking Posted November 27, 2016 Author Report Share Posted November 27, 2016 all nice and clean now Quote Link to comment Share on other sites More sharing options...
viking Posted November 27, 2016 Author Report Share Posted November 27, 2016 second job was to get some window channels in, very fiddlie job getting them tiny screws down the channels and finding the hole, forgot to take a picture of them in Quote Link to comment Share on other sites More sharing options...
viking Posted November 27, 2016 Author Report Share Posted November 27, 2016 also got these bits back from paint shop, wondered what went in this gap Quote Link to comment Share on other sites More sharing options...
viking Posted November 27, 2016 Author Report Share Posted November 27, 2016 then started to put the glass in, this is where i got a bit stuck, as it is iv only put the 2 bottom channels on and one on the rear on the outside as i wasnt sure if there were 2 vertical channels or just the one either side where it sits, then started to put the glass in, this is where i got a bit stuck, as it is iv only put the 2 bottom channels on and one on the rear on the outside as i wasnt sure if there were 2 vertical channels or just the one either side where it sits, . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.