Guest cookoff013 Posted November 18, 2016 Report Share Posted November 18, 2016 hi, is it feasable to do or will it cost too much to fabricate? has anyone got any good ideas? who would be the best OR cheapest to do? i was more thinking of a cartridge held in a sleeve tube, and RTO`d. wouldnt mind a bigger crank handle for better leverage... Quote Link to comment Share on other sites More sharing options...
islandgun Posted November 18, 2016 Report Share Posted November 18, 2016 I did think about incorperating a threaded rto head from gaep or c&g into a tube, but have bought hand cranks from ebay and here, but recently bought a 410 and 20 bore from siam Quote Link to comment Share on other sites More sharing options...
B525 LIGHT Posted November 18, 2016 Report Share Posted November 18, 2016 A 3.5" one would be excellent. Quote Link to comment Share on other sites More sharing options...
222mark Posted November 18, 2016 Report Share Posted November 18, 2016 Ian charlton of clay and game had some made years ago. there is a of one in climbing the north face of the 410. Quote Link to comment Share on other sites More sharing options...
Continental Shooter Posted November 19, 2016 Report Share Posted November 19, 2016 You can try using a drill stand; I did have one from my uncle made with a washing machine motor and an hand crancked rolling device; i did modify to work on the drill stand and; other than the weight, it was my companion till a bought an 8 station automatic one. with hindsight, a drill through the drill stand would have sufficed.... but drills back then were not for playing about The only thing you need to be careful is where you place your shell holder as the slight deviation makes the crimp look weird. my advise would be to wld it to the base of the stand once you're sure that where it has to be! Quote Link to comment Share on other sites More sharing options...
222 Posted November 19, 2016 Report Share Posted November 19, 2016 clay game and allan myers still have them made by the same gentleman in Leicester if any body wants one let me know £ 25 i think in all calibers roller and base for cartridge i dont know what postage will be at this moment of time Quote Link to comment Share on other sites More sharing options...
hawkeye Posted November 23, 2016 Report Share Posted November 23, 2016 use my rto in a bench drill going very slow does the job great .. Quote Link to comment Share on other sites More sharing options...
subsonicnat Posted November 23, 2016 Report Share Posted November 23, 2016 Made one for a 10,or was it 8,lol many years ago,think its in the garage still.?. Did make the HEAD Detachable so it could be kept clean,as they do pick crud sometimes. Clamped to table top.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.