flippermaj Posted September 30, 2018 Report Share Posted September 30, 2018 The stock on my SXP is getting slightly loose so I took the but pad off and expected to find a bolt head that I could tighten. Instead it is held on with a bolt that has an allen key type head. How do you get to this with an allen key as it is way down in the stock? Is there some long extension allen key that I can buy or do I need to make something up? Any one know what size the allen key is? Cheers Quote Link to comment Share on other sites More sharing options...
Old farrier Posted September 30, 2018 Report Share Posted September 30, 2018 Try a socket with a hexagonal key 3/8 drive there are long Allen keys your gun shop may have one or tighten it for you Quote Link to comment Share on other sites More sharing options...
guzzicat Posted September 30, 2018 Report Share Posted September 30, 2018 Just checked on line, hex head is 6mm, cut one down , use matching socket & a long extension. Quote Link to comment Share on other sites More sharing options...
hawkfanz Posted October 1, 2018 Report Share Posted October 1, 2018 i have a set of hexagon keys to fit my snapon ratchet an bars,had both my lanber stocks off recently,mine were 5mm hex key. Quote Link to comment Share on other sites More sharing options...
Lord v Posted October 1, 2018 Report Share Posted October 1, 2018 I have a cheap set of hex driver/heads with an adaptor for a ratchet. Lidl I think. Have been worth their weight in gold for furniture assembly, would be pretty useful here as well! Quote Link to comment Share on other sites More sharing options...
flippermaj Posted October 1, 2018 Author Report Share Posted October 1, 2018 Thanks for all the help everyone. cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.