OGGIE Posted April 2, 2022 Report Share Posted April 2, 2022 I want to seperate the plastic case from the brass cap of a 12 bore cartridge. The problem I'm having is that my left hand hasn't much grip after having an operation on it and I can't pull them apart. I don't want to put the brass in a vice and spoil it as I want to use it for the cap on a walking stick handle. Any ideas please. Cheers, Alan. Quote Link to comment Share on other sites More sharing options...
Diver One Posted April 2, 2022 Report Share Posted April 2, 2022 I put the plastic in a vice, cut off the brass bit. Wrapped brass in masking tape, back in vice and ground out the remaining plastic with a dremmel Quote Link to comment Share on other sites More sharing options...
Old farrier Posted April 2, 2022 Report Share Posted April 2, 2022 Plastic in the vice gas torch leather gloves and pull it off don’t do this to a live one 🙄 Quote Link to comment Share on other sites More sharing options...
mel b3 Posted April 3, 2022 Report Share Posted April 3, 2022 9 hours ago, Old farrier said: Plastic in the vice gas torch leather gloves and pull it off don’t do this to a live one 🙄 This . I did a load of 20b , to make buttons for chesterfield chairs. Quote Link to comment Share on other sites More sharing options...
OGGIE Posted April 3, 2022 Author Report Share Posted April 3, 2022 Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.