samboy Posted September 25 Report Share Posted September 25 (edited) Hi gang. The gauge on my rifle says 150 but when i tried to top it up the needle on the bottle only goes up to 100. I have tried with the rifle cocked and uncocked but to no avail. Any thoughts on this ?. I have put about 4 mags through the gun and the rifle gauge hasn't moved. Thanks all. Edited September 25 by samboy Added a bit. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted September 25 Report Share Posted September 25 Hello, Maybe you need fill cylinder ? you can check how much in Cylinder but getting a stop plug Quote Link to comment Share on other sites More sharing options...
old'un Posted September 25 Report Share Posted September 25 As oldpp said, perhaps your bottle only as 100 bar of air in it? Don't know why the rifle gauge is stuck on 150 bar. Quote Link to comment Share on other sites More sharing options...
Mr.C Posted September 25 Report Share Posted September 25 The guages aren't that expensive either just don't overtighten it when fitting the new one along with new seals. Quote Link to comment Share on other sites More sharing options...
samboy Posted September 26 Author Report Share Posted September 26 Update. Took the rifle round my mates and used his bottle to fill up. Every thing ok and gauge not stuck.. So my bottle must be empty. I did do a few dry firings and the gauge did move. So will be refilling the bottle tomorrow. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted September 26 Report Share Posted September 26 (edited) Hello, If you look at Best Fittings Quick Coupler Kit your see how I check the Cylinder for Air Content using the Pressure/ Dust plug , Fit plug /open valve/ will give cylinder pressure reading on guage, There are 2 quick couplers to go on you rifle/rifles fill adapters, I presume your 410 has a T bar , That is what i used on my 410 Edited September 26 by oldypigeonpopper Quote Link to comment Share on other sites More sharing options...
samboy Posted September 26 Author Report Share Posted September 26 26 minutes ago, oldypigeonpopper said: Hello, If you look at Best Fittings Quick Coupler Kit your see how I check the Cylinder for Air Content using the Pressure/ Dust plug , Fit plug /open valve/ will give cylinder pressure reading on guage, There are 2 quick couplers to go on you rifle/rifles fill adapters, I presume your 410 has a T bar , That is what i used on my 410 I will have a look and yes i have the T bar . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.