activeviii Posted July 9, 2009 Report Share Posted July 9, 2009 bit of a daft question but i like to know. I have a beretta U2 semi, great gun love it to bits, in the box there is the spanners, the chokes and key, shims for adjusting cast and that and even a little pot of oil but what this rod for. about 300mm long and 4mm wide with a nobble on one end but i cant find what its for. anyone know? ATB Phil Quote Link to comment Share on other sites More sharing options...
Harnser Posted July 9, 2009 Report Share Posted July 9, 2009 Possibly a magazine restriction aid . Put into the magazine it would restrict the magazine to only one cartridge , I think ? Harnser . Quote Link to comment Share on other sites More sharing options...
malkiserow Posted July 9, 2009 Report Share Posted July 9, 2009 Can you add a picture ? Quote Link to comment Share on other sites More sharing options...
chippy18 Posted July 9, 2009 Report Share Posted July 9, 2009 Think you will find it's the magazine reducer plug. Cheers Quote Link to comment Share on other sites More sharing options...
activeviii Posted July 9, 2009 Author Report Share Posted July 9, 2009 that would make sense. i used it to clean the crud out of the place your talking about. so at a guess i would undo the front bit, slide this bar in so the nobble is on the outside and then screw back together.....gosh i speak technically.lol. will go and have a look i think. thanks Phil. Quote Link to comment Share on other sites More sharing options...
casts_by_fly Posted July 9, 2009 Report Share Posted July 9, 2009 you'll pull off the front wood and there will be a cap on the end of the mag tube. Usually it is inside the mag tube and will have a slot in the top, Pull that out (don't get hit by the mag spring), put the reducer in, and put the cap back on. All of the plugs I've seen have taken the capacity from 5 to 3, but that's because in the states we don't have a 3-shot cap in general (so there are no crimped semi autos) but Federal Fish and Wildlife regs require a 3-shot cap on ducks and geese and some states require a 3-shot cap for all small game. thanks rick Quote Link to comment Share on other sites More sharing options...
racingfrank7 Posted July 9, 2009 Report Share Posted July 9, 2009 As far as i have been told, ( i have a al391 semi ) its a punch to drift a pin out on the trigger mech, so that it can be fully stripped Quote Link to comment Share on other sites More sharing options...
activeviii Posted July 9, 2009 Author Report Share Posted July 9, 2009 bit long for a punch and soft. i tested things this afternoon and it fits in the end, under the cap and nice n neat. i can put 1 70mm cart in the mag or 2 x 65mm's. now i know what its for. thanks for your input gents. ATB Phil. Quote Link to comment Share on other sites More sharing options...
Floating Chamber Posted July 12, 2009 Report Share Posted July 12, 2009 (edited) 300mm is a foot! Is it a FAC version? My FEO would be on my back if I could remove my restrictor* *I have a crimped mag tube. Edited July 12, 2009 by Floating Chamber Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.