mag44uk

Thanks for replies. The A0 loads I made work well. Made some up with D037.2 but as yet untried.

I have a few trays of 800 615 and 616 primers @ £22 a tray. I have a pack of approx. 700 Cheddite cx50 0.243 type 209 primers @ £20. Collection only @ Bisley/Reading . Travelling up M6 soon so could drop off.

If these are still available I will take them.

is this now sold?

On paper this appears to be a good powder. Very slightly faster than H110 and about the same as SP3. I suspect its the same as 4100 and others but cant confirm it. I can find no data specifically for this powder. I know it replaced AA9 for which there is scant data. I emailed explosia.cz who tell me they have no 410 data for it. I have just mailed them back pointing out it says on the label its suitable for 410 ! I plan on using this in 3inch cases for clay busting. Anyone using it? Cheers, Tony

I am using a case trimmer to remove the manky end! Will be roll crimping. Only just got all the tools/items together.

I could use a couple of hundred. Not too fussed but am using Eley at the moment. I have been bin diving but no luck!

Will abandon that idea. FES is about the same price.

Cases of 9600 @ £200 a case. 615 and 616 one of each. Collection only. Contact: mag44uk@yahoodotcom (remove the dot) Tony

Haven't used them for a couple of years and it appears that free shipping is now over 1000 euro And shipping is actually 35 euro on top to cover any hazmat components. Does any one local to Reading/Farnham/Bisley want to share an order? I plan on getting a load of 410 cases/wads and 12g slug cases and slugs.

Industrial packs of 9600. One box of each. £200 a box or £380 for the two. Collect only or could drop off Reading/Aldershot/Bisley Tony

10 x drippers (US No 6) Cooker ring and PID controller electronics. All new. £90 delivered. Will go on the bay in 2 weeks if not sold here.

I have one box of each. These are the industrial packs of 9600. £230 per box. Can meet at Bisley. Tony

I planned on setting up for making lead shot. Never got around to it and quite frankly lack the enthusiasm. There are 10 drippers nominally for No6 shot. One 7inch 1800watt ring. One PID controller with sensor and solid state relay. There is a written down link to get the wiring and operating instructions. Looking for £85 inc delivery. I am not interested in splitting. Best to get me on mag44uk@yahoodotcom. Remove the dot ! Tony

I have the box of 616 left. Tony

I have one box of each, industrial size - 9600 @£250 per box. Collect only or meet as Bisley. Tony

Club mate looking for either of the above.44 preferred but will consider any caliber. Let me know if you have one lurking. Tony

I have seen steel plates suspended inside car tyres. No splash and if you cast you can reclaim the lead. The tyre also allows a bit of give. Tyres are free and no real construction needed apart from anchoring them down. HTH Tony

If you are still looking I have a couple of sets of 38/357,various makes including Lee. Tony

If it helps I have a pile of once fired winchester 22 hornet brass. Cheers, tony

Well,I am another going to make a shotmaker and have researched this over the past couple of years! I have 7 drippers for no6 that I got from the US last year. I am going to use electric and probably use a PID controller as I have the parts to make one. I will use stainless plate which I can weld together myself. The only question I have is what is a good thickness for the steel? I was thinking 3mm but I cant see weight being an issue so maybe 2mm? And does it matter what grade stainless? Cheers, Tony

What is your offer?

I have 750 in 3 slabs. £150 collected or could meet at my club near Aldershot. Can also drop off Bracknell/Sandhurst/Camberley within reason! Will need to see SGC or FAC Tony

One of my chums was really excited to get his fac back with a slot for a 303 pistol! Couldnt find one so sent it back.............. Tony

No website,the bullets are RG 62gn,current issue and rare as hens teeth to find! Reloading tracer can be tricky as most of it uses a powder not available to us. General opinion seems to be using a ball powder such as W748 as its a modified version of this that is used in US military tracer. I believe there is one powder for 223 and one for 308/30-06. I have only loaded pulled 308 bullets and have varied success. N140 wasnt great but Vectan SP7 lit 80% up. One tip I was given but not tried yet is to pierce the metal retaining cap in the base of the bullet. If you have a look on THE HIGHROAD.org website there was a discussion a couple of months back about loading tracer. Tony