redthunder Posted October 26, 2006 Report Share Posted October 26, 2006 Alrite peeps, Me and my mate just been out on one of the farms we shoot as we pulled up we put the lamp out of the window of the landy and there was charlie must have been munching on something about 100 to 120 yards i got out the .243 rested on the bonnet and wack strait through the head taking half his head and eye away when we picked charlie up (a vixen) her coat and tail was in tip top condition so i had to take the tail whats the best way to cure the tail as we normaly just dump the shot foxes on the fire on the farm we never bothered taking the tails before just wondered whats the best way cheers?? Quote Link to comment Share on other sites More sharing options...
deadeye ive Posted October 26, 2006 Report Share Posted October 26, 2006 Now a old fella told me this and from experience it works a treat What you need 1 small tundish Finely crushed sea salt mineralised methylated spirits Large empty coffee jar Now I'm guessing you managed to strip the tail successfully away from the tail bone . Simply take the tundish and push it down the core as far as you can and insert as much salt as it takes to fill up the inner . Then place in a coffee jar and fill with meths and screw the lid back on ............Leave for at least a month . Works a treat Good luck ..Do it sooner rather than later as they soon go off . Quote Link to comment Share on other sites More sharing options...
the hitman Posted October 27, 2006 Report Share Posted October 27, 2006 Never done this myself , but a keeper told me his method. Strip tail from bone as quick as poss after kill, then pour spirit ( whiskey etc ) into it , tie end and leave to dry. Quote Link to comment Share on other sites More sharing options...
henry d Posted October 27, 2006 Report Share Posted October 27, 2006 I just strip it off the bone and hang in a dry airy place(not tried it in high summer) Quote Link to comment Share on other sites More sharing options...
P03 Posted October 27, 2006 Report Share Posted October 27, 2006 Now a old fella told me this and from experience it works a treat What you need 1 small tundish Finely crushed sea salt mineralised methylated spirits Large empty coffee jar Now I'm guessing you managed to strip the tail successfully away from the tail bone . Simply take the tundish and push it down the core as far as you can and insert as much salt as it takes to fill up the inner . Then place in a coffee jar and fill with meths and screw the lid back on ............Leave for at least a month . Works a treat Good luck ..Do it sooner rather than later as they soon go off . I hesitate to ask but..........What's a Tundish? Quote Link to comment Share on other sites More sharing options...
deadeye ive Posted October 27, 2006 Report Share Posted October 27, 2006 It's a funnel mate ........most DIY stores have them in sets where they come in a variety of sizes but for this the smallest one would do the job Quote Link to comment Share on other sites More sharing options...
black hat Posted October 27, 2006 Report Share Posted October 27, 2006 so how whould you debone the tail ,not a fox shooter persay ,but been out with a mate whpo has kept down the numbers around here .and out of interest wondered how you would do it Quote Link to comment Share on other sites More sharing options...
bigdunny Posted October 28, 2006 Report Share Posted October 28, 2006 I have done a few over the years, cut around base of the tail with a sharp knife pull back the skin and get 2 bits of stick/wood and place then either side of the of the incision on the tail, holding onto the 2 bits of wood firmly pull the skin away from the flesh/bone its a bit fiddly to do but once you get the hang of it you can skin a tail in seconds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.