chris1961 Posted March 27, 2016 Report Share Posted March 27, 2016 The last two times I've been clay bashing my lanba has only fired one barrel one or twice then works perfect rest of the day stripped sears nothing wrong there all appears as it should shooting 28 grams it only does it a couple of times then it works fine all day Quote Link to comment Share on other sites More sharing options...
GingerCat Posted March 27, 2016 Report Share Posted March 27, 2016 Hmm. I would say the recoil feom the first shot is not resetting the trigger but 28 grams shouldn't have an issue with that. Somethings a bit stiff in there so might be best to get it looked at professionally if a strip and clean at home hasn't sorted it out. Quote Link to comment Share on other sites More sharing options...
JohnfromUK Posted March 28, 2016 Report Share Posted March 28, 2016 You don't say if it 'releases & clicks' as in striking? If there is no 'click' of the tumbler falling, I would tend to agree with GingerCat, in that the recoil if proving insufficient to set the trigger to the second barrel ...... however, if you get the hammer releasing and hear the click, it could be a firing pin or 'light strike' issue. Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted March 28, 2016 Report Share Posted March 28, 2016 Just out of interest - try wearing a glove on your right hand (assuming you are right handed!) - you could be "hanging" on the trigger, common problem that many shooters experience from time to time. Quote Link to comment Share on other sites More sharing options...
chris1961 Posted March 28, 2016 Author Report Share Posted March 28, 2016 No click switch barrel selected fires ok only happens now and then striped stock off everything appears ok bang back of but pad fires ok it?could be me as it was cold and I have white finger (no felling in fingers when cold) have it a good clean wasn't dirty at all so reoiled try it next weekend Quote Link to comment Share on other sites More sharing options...
ChrisAsh Posted March 28, 2016 Report Share Posted March 28, 2016 Next time it happens just make sure you release the trigger and then fire again, if it fires its your fingers if not its a problem Quote Link to comment Share on other sites More sharing options...
Bantam boy Posted April 1, 2016 Report Share Posted April 1, 2016 It's a known fault with Lambers, mine did it and so did my mates, Safety catch spring gets weak or broken, Andy Quote Link to comment Share on other sites More sharing options...
chris1961 Posted April 5, 2016 Author Report Share Posted April 5, 2016 Stripped it down all ok no wear anywhere on the action cleaned it with carb cleaner then reoiled it works great must have been abit of muck in it somewhere it's fine now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.