NorfolkAYA Posted May 24, 2016 Report Share Posted May 24, 2016 Hi all, as above what does everyone use to clean there action?. Regards Pete Quote Link to comment Share on other sites More sharing options...
old'un Posted May 25, 2016 Report Share Posted May 25, 2016 WD40 on the metal bits and silicon spray/grease on the wooden bits. Quote Link to comment Share on other sites More sharing options...
Dougy Posted May 25, 2016 Report Share Posted May 25, 2016 Special Stuff, A good blast with an electrical type cleaner that has a fast evaporation, Ambersil is one that I'm using at the moment. Adding a little agitation with a chamber brush helps remove the crud. Quote Link to comment Share on other sites More sharing options...
ChrisAsh Posted May 25, 2016 Report Share Posted May 25, 2016 There is a good youtube video of a old english gunsmith taking a SxS apart and putting it all back together, forget the name but talking to a American whilst doing it Quote Link to comment Share on other sites More sharing options...
Graham M Posted May 25, 2016 Report Share Posted May 25, 2016 (edited) Jack Rowe talking to Larry Potterfield. He is getting on a bit now but I watched how he wrapped a linseed soaked rag around the hand of a S/S and then used a propane torch to bend the stock. G Edited May 25, 2016 by Graham M Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.