shaun4860 Posted May 12, 2007 Report Share Posted May 12, 2007 after writing a while ago on someone else's post about these kits i had said that the trigger pull on my .22 sillouette was good enough out of the box i decided to bite the bullet and fit one of these. takes about 15 minutes and the difference is fantastic and therefore am apologising to whoever post it was these kits are amazing for the difference a spring and a little copper tube makes... if you have a cz you NEED one of these. Quote Link to comment Share on other sites More sharing options...
dazzyboi Posted May 12, 2007 Report Share Posted May 12, 2007 Iv got a CZ, and a trigger kit, but i havnt had it fitted yet....might take it in and get it done. Quote Link to comment Share on other sites More sharing options...
shaun4860 Posted May 12, 2007 Author Report Share Posted May 12, 2007 if you have access to a vice and a mate with a steady hand it takes 15mins to do it yourself.....honest the instructions come with the kit as you know.... Quote Link to comment Share on other sites More sharing options...
dunganick Posted May 13, 2007 Report Share Posted May 13, 2007 do the work with a bag over the action of the gun, there is a captive ball bearing that just loves to fly out. Although it is possible to replace the component so that this dosent need to be removed. well worth the upgrade though, would of difference. Quote Link to comment Share on other sites More sharing options...
Guest rabo Posted May 13, 2007 Report Share Posted May 13, 2007 Ive got a trigger kit ok BUT NO GUN ACTUALLY IT'S NOT FUNNY Quote Link to comment Share on other sites More sharing options...
dazza Posted May 13, 2007 Report Share Posted May 13, 2007 I also have a trigger kit and no gun and no it's not funny Quote Link to comment Share on other sites More sharing options...
Guest rabo Posted May 13, 2007 Report Share Posted May 13, 2007 keep the head up dazza we'll have the last laugh,,I HOPE Quote Link to comment Share on other sites More sharing options...
Dunkield Posted May 13, 2007 Report Share Posted May 13, 2007 if you have a cz you NEED one of these. They are cheap mass produced guns, some need the kit, some don't. I would go out and buy the kit unless I was sure my gun needed it. Mine needed it, but I have shot a couple of other 452's that are as good if not better than mine and they haven't been touched apart from adjusting the spring tension. Quote Link to comment Share on other sites More sharing options...
taffygun Posted May 13, 2007 Report Share Posted May 13, 2007 I have the kit fitted to mine, I fitted the lb and a half spring and tweaked it up to lb and 3/4, tested with a pull gauge. Improves the accuracy also, easier pull less snatch. I believe that the new CZ453's and now the newer 452's come with the lighter trigger already fitted. Quote Link to comment Share on other sites More sharing options...
magman Posted May 13, 2007 Report Share Posted May 13, 2007 if you have a cz you NEED one of these. They are cheap mass produced guns, some need the kit, some don't. I would go out and buy the kit unless I was sure my gun needed it. Mine needed it, but I have shot a couple of other 452's that are as good if not better than mine and they haven't been touched apart from adjusting the spring tension. the trigger on my cz is as it come out the box and being used to the two stage trigger on the hw airguns i find mine brilliant . seem,s to be almost the same as the hw trigger suit,s me fine and shooting 13 rabbits and a maggie last night for 15 shot,s dont think i will bother with the trigger kit imho Quote Link to comment Share on other sites More sharing options...
30-6 Posted May 13, 2007 Report Share Posted May 13, 2007 If one of these kits are fitted, how do you fair if a warranty claim is required within the 3 years guarantee? Can the procedure be reversed to fit the original trigger? Quote Link to comment Share on other sites More sharing options...
shaun4860 Posted May 13, 2007 Author Report Share Posted May 13, 2007 If one of these kits are fitted, how do you fair if a warranty claim is required within the 3 years guarantee? Can the procedure be reversed to fit the original trigger? yup it invalidates the warranty but its a 15 min job to put it back to standard Quote Link to comment Share on other sites More sharing options...
dunganick Posted May 13, 2007 Report Share Posted May 13, 2007 what are you going to claim on? its a barrel and an action normally if you claimed with the importer they would only want the barrel action anyway, no trigger mech etc... as these can become damaged in transport. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.