simcgunner Posted March 4, 2019 Report Share Posted March 4, 2019 I have been looking for a case for a three barreled set. 12 bore gun with 28;30 and 32 inch bbls. Any suggestions? Quote Link to comment Share on other sites More sharing options...
panoma1 Posted March 4, 2019 Report Share Posted March 4, 2019 I think you will find this hard to find! I have been looking, unsuccessfully for a year or two for a case to take a 34inch barrelled 8 bore, anything not either a standard 12 bore single or double gun case is very difficult to obtain! I have refitted guncases in the past, if you are at all handy....you could buy a double gun case, strip and refit it to fit your triple barrel set! Quote Link to comment Share on other sites More sharing options...
Gunman Posted March 4, 2019 Report Share Posted March 4, 2019 Finding a traditional gun case that will take 32" barrels will be a problem as very few will take any longer than 30". It will also be very heavy . You could try Shaun Mears who dealt and revamped gun cases 01670 861154 .Havent had any contact with him for a few years but if he's still doing them tell him Graham from Fosters said to give him a call . Quote Link to comment Share on other sites More sharing options...
simcgunner Posted March 4, 2019 Author Report Share Posted March 4, 2019 Thank you the only case I can find is from an Italian. Maker Nagrini. They advertise a case that will hold a 34 in bbl panama 1. I may have To order one. Quote Link to comment Share on other sites More sharing options...
JohnfromUK Posted March 4, 2019 Report Share Posted March 4, 2019 I have a case for my AyA that takes 2 sets of barrels - and would take up to 32". I believe it was made for my gun (arranged by a previous owner) and supplied through ASI (UK AyA importers). That would have been in the late 1980s I think, and I suspect it may have been supplied by Brady (of Halesowen, UK). https://www.bradybags.co.uk/ They are still in business, though not sure that they make hard cases any more. What about something like this? https://www.peli.com/eu/en/product/cases/long-case/protector/1700 Quote Link to comment Share on other sites More sharing options...
team tractor Posted March 4, 2019 Report Share Posted March 4, 2019 I can make one if your stuck but it won’t be cheap Quote Link to comment Share on other sites More sharing options...
simcgunner Posted March 4, 2019 Author Report Share Posted March 4, 2019 Thanks team tractor. Nothing worth while is cheap. Quote Link to comment Share on other sites More sharing options...
team tractor Posted March 4, 2019 Report Share Posted March 4, 2019 2 hours ago, simcgunner said: Thanks team tractor. Nothing worth while is cheap. Just let me know if you get stuck 👍 oak veneer is £80 a sheet plus other bits . Guessing £2-300 If im honest plus foam inside . Ive made a few bits like this for people. 👍👍 Quote Link to comment Share on other sites More sharing options...
simcgunner Posted March 13, 2019 Author Report Share Posted March 13, 2019 (edited) Found one Edited March 14, 2019 by simcgunner add picture Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.