auskerry Posted May 2, 2020 Report Share Posted May 2, 2020 Hi,I'm looking for a disc set striker for Aya no 2. Thanks. Link to comment Share on other sites More sharing options...
Tony Morris Posted May 3, 2020 Report Share Posted May 3, 2020 T W Chambers (www.gunspares.co.uk) are showing them as in stock part number STO14 @ £11.90 each. Assuming this price to be correct it is very good value and their products are very well made. Good luck with it. Tony Morris. Link to comment Share on other sites More sharing options...
auskerry Posted May 3, 2020 Author Report Share Posted May 3, 2020 Hi,Thanks for that but that's a the firing pin. I found the disc there before but it was always out of stock.. Link to comment Share on other sites More sharing options...
Old Boggy Posted May 4, 2020 Report Share Posted May 4, 2020 21 hours ago, auskerry said: Hi,Thanks for that but that's a the firing pin. I found the disc there before but it was always out of stock.. Tony Morris was correct as you asked for a disc set striker, namely the striker/firing pin. It would appear that you are after the striker disc, not the firing pin. Perhaps Wabbitbosher may be able to assist, always worth a try. OB Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 4, 2020 Report Share Posted May 4, 2020 (edited) hello, part number ST046 in chambers ?? requires to be drilled, £13, not stating out of stock?? Edited May 4, 2020 by oldypigeonpopper Link to comment Share on other sites More sharing options...
wabbitbosher Posted May 8, 2020 Report Share Posted May 8, 2020 Are they different from a normal Aya ? ive done them on yeomans they normally require a bit of fitting Link to comment Share on other sites More sharing options...
auskerry Posted May 11, 2020 Author Report Share Posted May 11, 2020 Thanks for all your help i got the pin and disc other day and it needs a fair bit of fitting right enough Link to comment Share on other sites More sharing options...
enfieldspares Posted May 11, 2020 Report Share Posted May 11, 2020 I have always found that the importers ASI are very very helpful and can also use an existing gun's serial number, often, to make sure that if a part has changed that you get the correct part for that gun. Link to comment Share on other sites More sharing options...
Recommended Posts