Gas seal Posted February 9, 2023 Report Share Posted February 9, 2023 Hi hafod l still use csb0 powder. I enclose photos of the burning rates for you. I have loaded .410 with csb0 with lead and steel pellets . I have loading data for csb0 for lead steel ITM and heavy shot if you need any data. I found it very good with ITM I still load for 28gauge and 20gauge with ITM. I have loaded for 28gauge to 8gauge with ITM and csb0 over the years . I’m down to my last tub now from about 2005 . Quote Link to comment Share on other sites More sharing options...
Andy H Posted February 9, 2023 Report Share Posted February 9, 2023 (edited) Edited February 9, 2023 by Andy H more information Quote Link to comment Share on other sites More sharing options...
Smiler23 Posted February 9, 2023 Report Share Posted February 9, 2023 Iv 5.5lb of the stuff, used in 10 bore years ago but not bothered much with it since I got rid of 10 Quote Link to comment Share on other sites More sharing options...
222mark Posted February 10, 2023 Report Share Posted February 10, 2023 19 hours ago, hafod said: Andy H Any chance you could find me the 20 bore data I find I'm using the 20 bore and 410 a lot more now than the 12 if I'm honest cheers mate Andy 70mm PT case, CX50primer, gualandi wad, 22grains CSBO for 28g lead and 20grains CSBO for 30g lead, crimp closure. Sorry no data for 24g lead but i would work up from 22 to 24 grains. Hope this helps. Quote Link to comment Share on other sites More sharing options...
hafod Posted February 10, 2023 Author Report Share Posted February 10, 2023 Thanks a lot guys I honestly thought I was going to be stuck with this powder I bought a load of reloading gear which consisted of a load of steel loading components and 1 kg of this powder plus a load of other reloading stuff about 7 or 8 years ago just out of interest when was this powder manufactured and marketed as i couldn't seem to find a lot of data on it I usually use the vectan A range of powders as I have a couple of kilo,s of each on hand Quote Link to comment Share on other sites More sharing options...
Andy H Posted February 10, 2023 Report Share Posted February 10, 2023 CSB0 is no longer made , The lowest CSB powder made by Maxam now is CSB1 , You might have a date code in the lot/batch information on your powder container. Quote Link to comment Share on other sites More sharing options...
Gas seal Posted February 10, 2023 Report Share Posted February 10, 2023 Hi hafod the last time I bought csb0 power was in 2005 from clay and game 28.50 per kg. One kg of hevi shot cost £28.00. Maxam ssb150 is a similar power to csb0 Quote Link to comment Share on other sites More sharing options...
hafod Posted February 10, 2023 Author Report Share Posted February 10, 2023 4 minutes ago, Gas seal said: Hi hafod the last time I bought csb0 power was in 2005 from clay and game 28.50 per kg. One kg of hevi shot cost £28.00. Maxam ssb150 is a similar power to csb0 Hiya I would have thought this kilo would be from about the same vintage 2004/2005 pity we couldnt go back in time eh 28.50 a kilo I,'ve had a good evening at the bench and had everything on had to load a few 3 inch csb0 410 loads to try out Quote Link to comment Share on other sites More sharing options...
Smiler23 Posted February 11, 2023 Report Share Posted February 11, 2023 On 09/02/2023 at 10:23, 222mark said: 70mm PT case, cx2000 primer, 36 to 38 grains CSBO, gualandi wad, 36g lead, crimp finish. Giving 1200 or 1300 fps. Any idea which gulandi was with that load? Lbc43 work with it? Quote Link to comment Share on other sites More sharing options...
222mark Posted February 11, 2023 Report Share Posted February 11, 2023 2 hours ago, Smiler23 said: Any idea which gulandi was with that load? Lbc43 work with it? I'll have a look tomorrow and let you know. Quote Link to comment Share on other sites More sharing options...
Andy H Posted February 11, 2023 Report Share Posted February 11, 2023 Gualandi super G-17 http://www.gualandi.it/img/products/plastic_wads/g_12-brg_17.jpg Quote Link to comment Share on other sites More sharing options...
222mark Posted February 12, 2023 Report Share Posted February 12, 2023 Gualandi super g17 with 36grain or Herlarco vp20 with 38 grain. Quote Link to comment Share on other sites More sharing options...
Smiler23 Posted February 15, 2023 Report Share Posted February 15, 2023 Cheers fellas Quote Link to comment Share on other sites More sharing options...
Smiler23 Posted February 15, 2023 Report Share Posted February 15, 2023 (edited) On 10/02/2023 at 11:10, 222mark said: 70mm PT case, CX50primer, gualandi wad, 22grains CSBO for 28g lead and 20grains CSBO for 30g lead, crimp closure. Sorry no data for 24g lead but i would work up from 22 to 24 grains. Hope this helps. What gualandi wad was with this load please? Edited... Just noticed it on above chart😂 Edited February 15, 2023 by Smiler23 Quote Link to comment Share on other sites More sharing options...
hafod Posted January 9 Author Report Share Posted January 9 On 07/02/2023 at 22:42, Andy H said: There are lead shot loads for csb0 in 410 , 28 , 20 , 12 , 10 and 8 bore. Hi Andy any chance of the data on the 28 bore loads for the csb0 powder loads please Quote Link to comment Share on other sites More sharing options...
Andy H Posted January 9 Report Share Posted January 9 6 hours ago, hafod said: Hi Andy any chance of the data on the 28 bore loads for the csb0 powder loads please They are on the second post down on this page . Quote Link to comment Share on other sites More sharing options...
hafod Posted January 9 Author Report Share Posted January 9 1 hour ago, Andy H said: They are on the second post down on this page . Cheers mate didnt see that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.