tazanimal

Hi how about post or where are you

Hi is the bridge sold Taz

Hi can i have the 30mm how about postage? Taz

hi is the tig/rods still up for sale taz

hi do you have any net left taz

Hi Will you take £125 for them You can ring me on 078809216617 Taz

hi has the stock been shortened to fit the adjuster taz

hi i am after some cases to make some 3" cases for my 410 taz

i am not the most academic of people i is very comforting when others help me thank you taz

pics i hope http://s1070.photobucket.com/user/tazanimal/media/DSC00041_zpsvuqxj4sj.jpg.html

ok had a chance to use it now the ting sound has completely gone it still has an acceptable noise level using no10 mec powder bush with magnum powder and 5/8 oz of no.4 shot in a 21/2" case. the hole lot is of though the sound barrier a bit sharpish like so we are stuck with some bam sound even though there is no report from it, the new baffle i made up out of T6 aluminum 16mm hole with a reduction to 15mm at the muzzle the thread on the end was a bit funny 35.5mm by 1.25mm ! gave it 5 chambers 15mm wide with 6 7mm holes into the bore each one ramped forward. and there is less weight on the end of the barrel . at 25 yards a A3 bit of paper was covered with no space for a bunny to sneak through . may try some glass pack round the barrel as it has holes drilled in it By the company that converted it when new. there is a good 6" from the end of the barrel to the baffle so i could make one 10 or12" long The old baffle consists of a brass end cap and 4 core plugs with a single hole in the middle

i have a dreadful ting when i fire my 410 hush power took it apart to clean it two of the tin discs had the hole enlarged i have had a play and this is what i have come up with will test it later in the week i can not seem to post a pick of my new one piece baffle the file is to big and i do not have a clue how to change it !

it takes it down to 9 shots from 20 plus the super hammer spring may have been a bit over the top i do not have a crono i put it in had 25 shots and decided it is to much for a child. the standard one kills squirrels at 25m add this to it and you better put it on your fac http://www.powermaxhipac.com/5--hipac-s.html then a multi shot breech this then is still less than a second hand pcp and half the weight http://www.gmaccustomparts.com/epages/BT3197.sf/en_GB/?ObjectPath=/Shops/BT3197/Products/002-0600 taz

Just got it from USA far to good for my little one cost £47 and And a extra strong hammer spring That was 8 I want £50 the pair posted Fits 2500 and lots of crosman Taz

hi i would like one if still up for sale and you will post taz

yes please if still up for sale taz

hi i have a set of optilock tikka blue tapered bases taz

HI TRY THIS LINK http://www.peterlawman.co.uk HE IS IN NORTHAMPTON TAZ

hi all they are sold and collected

hi i have two 12 bore side by side box lock non ejectors in usable condision one is a belgian old well used,65 mm chambers some rust spots short barrels *** 26" second one is a spanish one not much use,sone rust spots on the outside of the barrels will clean nice colour hardening long barels 28" or 30" sold thease come from a friend so sold as seen on my ticket so on problems in milton keynes

SOLD

hi all having a war on the pesky bunnys in one of my friends horse fields but they all seem to have liver flukes and or tape worms can we catch it from a cooked bunny? shot a 1/2 size bunny to day and its liver was full of the white bits from the fluke taz

hi i am on the look out for a pair of browning midas invector plus skeet chokes that is the black ones with gold rings taz :o

For sale is 8 invector (full,3/4,1/2,3/8,1/4 and 3 skeet exstended) Traded in my mk70 miroku for a browning ultra xs so i am having to get new set of choke sold plus postage the lot will take paypal if sent as gift now sold