steyrman Posted April 12, 2011 Report Share Posted April 12, 2011 Can someone recomend an over barrel sound mod for my .22 wmr Quote Link to comment Share on other sites More sharing options...
willy1 Posted April 12, 2011 Report Share Posted April 12, 2011 To be honest, you are just as well off to fit a muzzle mounted SAK to a WMR,that's what I use on mine with good results,I really can't warrant the extra expense in an over barrel mod. Alan Quote Link to comment Share on other sites More sharing options...
gixer1 Posted April 12, 2011 Report Share Posted April 12, 2011 i wish i could fit one to mine... Quote Link to comment Share on other sites More sharing options...
steyrman Posted April 12, 2011 Author Report Share Posted April 12, 2011 Thats a nice rifle mate. I bought a mod off here a while ago works great on my mates but my rifle wont zero with it on Quote Link to comment Share on other sites More sharing options...
gixer1 Posted April 12, 2011 Report Share Posted April 12, 2011 I actually wondered if i could get a barrel clamp that was wider thus splaying the barrel and mag tube further apart to allow a mod to be put on, does a mod make all that much difference on a WMR? i thought i remember someone saying it wasn't that worth while? Regards, Gixer Quote Link to comment Share on other sites More sharing options...
willy1 Posted April 12, 2011 Report Share Posted April 12, 2011 Gixer, the fitting of a mod to a .22wmr DOES make quite a diffence to the muzzle report,it has quietened mine down a lot,and it's only a sak mod that I use. Alan Quote Link to comment Share on other sites More sharing options...
steyrman Posted April 12, 2011 Author Report Share Posted April 12, 2011 Its defo worth putting a mod on a wmr Quote Link to comment Share on other sites More sharing options...
Glensman Posted April 12, 2011 Report Share Posted April 12, 2011 Its defo worth putting a mod on a wmr What do you think was causing it to not zero correctly? Quote Link to comment Share on other sites More sharing options...
steve42 Posted April 12, 2011 Report Share Posted April 12, 2011 (edited) I actually wondered if i could get a barrel clamp that was wider thus splaying the barrel and mag tube further apart to allow a mod to be put on, does a mod make all that much difference on a WMR? i thought i remember someone saying it wasn't that worth while? Regards, Gixer Could you not cut the end of the mag down by the length of one bullet to give you the room to thread it ? Just a thuought Edited April 12, 2011 by steve42 Quote Link to comment Share on other sites More sharing options...
gixer1 Posted April 12, 2011 Report Share Posted April 12, 2011 Could you not cut the end of the mag down by the length of one bullet to give you the room to thread it ? Just a thuought I did look at this steve as the fill port is about 4" down from the end, but the spring loaded plunger rod is the problem as it has a small circlip groove crimped into the end... :( Regards, Gixer Quote Link to comment Share on other sites More sharing options...
steyrman Posted April 12, 2011 Author Report Share Posted April 12, 2011 I have no idea Glensman but it works perfect on my mates Quote Link to comment Share on other sites More sharing options...
al4x Posted April 12, 2011 Report Share Posted April 12, 2011 I did look at this steve as the fill port is about 4" down from the end, but the spring loaded plunger rod is the problem as it has a small circlip groove crimped into the end... :( Regards, Gixer can't you just give it back to John Wayne and get a decent bolt action Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted April 12, 2011 Report Share Posted April 12, 2011 A DM80 should do the job. I used to own a Winchester 9422 .22LR underlever rifle. The barrel was threaded, but to fill the tubular magazine under the barrel, I had to remove the moderator (Parker Hale) This posed no big problem as it was a 15 shot. Steve. Quote Link to comment Share on other sites More sharing options...
gixer1 Posted April 12, 2011 Report Share Posted April 12, 2011 can't you just give it back to John Wayne and get a decent bolt action SILENCE!!!...YOU UNHOLY BLASPHEMER!! wheres the fun in a boring old bolt action?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.