stripey999 Posted April 6, 2012 Report Share Posted April 6, 2012 Now that the weather has got wet again, I realise that my wax jacket has lost its waterproof protection. I looked in countrywide and on the net and the two most common reproofing items seem to be the Barbour Wax tin or NIKWAX wax cotton proof spray. Both are priced the same but very different in what they are. As I have not used either, which do you use and would recommend? Quote Link to comment Share on other sites More sharing options...
Penfolio Posted April 6, 2012 Report Share Posted April 6, 2012 The Barbour dressing wax will allow you to re-wax your coat. The Nikwax stuff is a DWR treatment. Personally I use Nikwax on my membrane and Paramo gear but, when it's time to renew the finish on my old wax jacket, I go with the Barbour wax (despite the faff involved). Quote Link to comment Share on other sites More sharing options...
Catweazle Posted April 6, 2012 Report Share Posted April 6, 2012 The Barbour wax is thick, heavy and difficult to apply evenly. Warm it up and spread it on very thin, use a hairdryer to get it into the cotton, otherwise your coat will go as stiff as a board in the first cold shower. It smells too. Nikwax has a very good reputation for waterproofing old style waxed cotton motorcycle clothing, I haven't used it myself. Quote Link to comment Share on other sites More sharing options...
stripey999 Posted April 6, 2012 Author Report Share Posted April 6, 2012 The Barbour dressing wax will allow you to re-wax your coat. The Nikwax stuff is a DWR treatment. Personally I use Nikwax on my membrane and Paramo gear but, when it's time to renew the finish on my old wax jacket, I go with the Barbour wax (despite the faff involved). Yes this was what was putting me off slightly. The spray seemed much easier and cleaner to use but I didn't get the feeling from reading the label that it would be as good as the wax. Quote Link to comment Share on other sites More sharing options...
evo Posted April 6, 2012 Report Share Posted April 6, 2012 just read the topic ,,would just like to give ya all a tip on what i found out from a very good sorce,,i wanted to re waterproof my boots ,deerhunter camo,s made from canvas,,one of the guy,s i used to climb with told me to use this stuff,,it is second to none and you will get many a re coat and its £16 from most builders but will totally waterproof canvas and cotton,,so i tried it on my boots and i am amazed at just how good it has waterproofed them,,only problem is once you have treated whatever you must let it dry naturally ,i left my boots for 3 days in the bedroom once it dried there is no smell whatsoever,,it really is brill,,i have since done my tents and many other things and i,ve still got over half a gallon left,,trust me it really does work,,if you dont beleive me then just read the back of the tin,,,cheers all and good luck,,oh it does not affect the suppleness of whatever you treat either :good: its called cementone water seal hope this helps evo Quote Link to comment Share on other sites More sharing options...
Sco77w Posted April 6, 2012 Report Share Posted April 6, 2012 What does the cementone look like when it has dried? If I'm looking at the right on it says that it has rubber in it. Quote Link to comment Share on other sites More sharing options...
evo Posted April 6, 2012 Report Share Posted April 6, 2012 (edited) What does the cementone look like when it has dried? If I'm looking at the right on it says that it has rubber in it. it dries clear it has made no difference to my tent or my boots ,,it just soaked into them i then left them to dry and you would not know they had even been touched they looked no different it is in a white 5ltr tin tried to put a picture on here but couldn,t Edited April 6, 2012 by evo Quote Link to comment Share on other sites More sharing options...
happypig Posted April 7, 2012 Report Share Posted April 7, 2012 Send it back to barbour? they have an aftersales service.... hp Quote Link to comment Share on other sites More sharing options...
activeviii Posted April 9, 2012 Report Share Posted April 9, 2012 go to Tim's and buy the tin of wax. hair drier and clothes. warm the wax and dab a bat of cloth in. rub in small circles until you have covered one arm then hit it with hairdryer. the wax will bead and get drawn into worn areas, you will see the differance on good areas compared with bad. any area that has to much wax will show so while warm you can buff off with the wax cloth. that your time and t will be worth it. once the whole coat had been done, put it on a hanger. you will not really be wearing it till next season so you can use the summer sun to get the wax to really work in. i cheat and put in conservatory but a green house would still do the job. it takes me about and hour to a pair of long leggings. Quote Link to comment Share on other sites More sharing options...
stripey999 Posted April 9, 2012 Author Report Share Posted April 9, 2012 go to Tim's and buy the tin of wax. hair drier and clothes. warm the wax and dab a bat of cloth in. rub in small circles until you have covered one arm then hit it with hairdryer. the wax will bead and get drawn into worn areas, you will see the differance on good areas compared with bad. any area that has to much wax will show so while warm you can buff off with the wax cloth. that your time and t will be worth it. once the whole coat had been done, put it on a hanger. you will not really be wearing it till next season so you can use the summer sun to get the wax to really work in. i cheat and put in conservatory but a green house would still do the job. it takes me about and hour to a pair of long leggings. Yes I think this is what I have decided to do. Need to do the coat and chaps ready for next beating season; I guess a tin will just about do them both? Quote Link to comment Share on other sites More sharing options...
activeviii Posted April 9, 2012 Report Share Posted April 9, 2012 one tin, its about the size of a boot polish tin, has done my leggings with very little gone out of the tin. i did warm the tin first and then sat in a rather hot conservatory for an hour in just shorts. it was that hot that the wax in the tin was like water. went on very easy. its the buffing off of the excess that was the work. Quote Link to comment Share on other sites More sharing options...
stripey999 Posted April 9, 2012 Author Report Share Posted April 9, 2012 Thanks for that, I will wait for the weather to improve then. Don't think my daughter would thank me for sitting in my boxers whilst buffing my coat. Quote Link to comment Share on other sites More sharing options...
DNS Posted April 10, 2012 Report Share Posted April 10, 2012 Whilst we've got the attention of the experts, can anyone advise me on how to reverse the process? I bought a Barbour recently which someone had -for reasons best known to themselves - bought new and then waxed very badly. It's very waterproof, but as stiff as a board. I only paid £20 for it, so its not a crisis, but I would like to get it sorted. Quote Link to comment Share on other sites More sharing options...
Mungler Posted April 10, 2012 Report Share Posted April 10, 2012 Blotting paper and a hair dryer or send it back to Barbour and make it their problem to fix for £30 Quote Link to comment Share on other sites More sharing options...
stripey999 Posted April 11, 2012 Author Report Share Posted April 11, 2012 Decided to do it myself after the advice and bought some Barbour Wax Thornproof Dressing for £7.19. I ordered it yesterday at 1218 and it arrived today at 1210. Super fast from countryattire.com. Will wait for the weather to warm up but thanks for the advice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.