team tractor Posted December 23, 2012 Report Share Posted December 23, 2012 I've got a lanber sport deluxe and the ****** is not firing the second barrel . This only happens every 3rd load but if i switch the lever ,both fire. I tried stripping the unit but theirs an Allen key about 7 mm 10" deep . Is this normal ? It's looks mashed already thanks to previous owner . It's only 3 years old . Any ideas please as its Xmas I want to shoot Quote Link to comment Share on other sites More sharing options...
Yellow Bear Posted December 23, 2012 Report Share Posted December 23, 2012 Simple question - are you releasing the trigger properly - this will stop the second barrel - been there done that! Quote Link to comment Share on other sites More sharing options...
team tractor Posted December 23, 2012 Author Report Share Posted December 23, 2012 Yer mate I'm releasing the trigger . I've owned this gun 18 months but shut it with mud on the cartridge in a rush to take a shot . I fired 8 in a row through it to have it happen once but its annoying . I've cleaned everything I can see but not inside . In my kitchen tonight I've tried it and I'd say every 3rd load after tapping on the back end it sticks to the point my hand hurts where I'm hitting it that hard Quote Link to comment Share on other sites More sharing options...
HDAV Posted December 25, 2012 Report Share Posted December 25, 2012 possibly the mud has caused the pin to stick or pit inspect the pins as best you can and if you have some compressed air try blowing it out stock bolts often need a long peice try an extension bar from a socket set (may need a couple) and bit holder with allen bit. Merry Christmas! Quote Link to comment Share on other sites More sharing options...
team tractor Posted December 25, 2012 Author Report Share Posted December 25, 2012 I have a Allen key set for the socket set but I've lost it so thought I might buy a single key if I knew the size but its defo bigger than 6mm slightly . Will try the compressed air trick cheers Quote Link to comment Share on other sites More sharing options...
HDAV Posted December 25, 2012 Report Share Posted December 25, 2012 This might help http://www.lanber.net/lanber_over-under.pdf Quote Link to comment Share on other sites More sharing options...
team tractor Posted December 25, 2012 Author Report Share Posted December 25, 2012 Cheers Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted December 26, 2012 Report Share Posted December 26, 2012 Try using a more powerfull shell in your first barrel until you get it sorted-make sure the stock bolt is not a Torx. Quote Link to comment Share on other sites More sharing options...
team tractor Posted December 26, 2012 Author Report Share Posted December 26, 2012 Will a 50g bb do the job . Quote Link to comment Share on other sites More sharing options...
B725 Posted December 27, 2012 Report Share Posted December 27, 2012 If it is only three years old it will have a five year warrenty,so it should be repaired for free. Quote Link to comment Share on other sites More sharing options...
cumbrian shooter Posted December 27, 2012 Report Share Posted December 27, 2012 I have a Allen key set for the socket set but I've lost it so thought I might buy a single key if I knew the size but its defo bigger than 6mm slightly . Will try the compressed air trick cheers its a torx bit i have the same gun and took the stock off to refinnish it, i had a armi silma doing the same thing cleaned it with break cleaner then got the airline on it but never solved it 100% it stopped for a while then started again, take it to a smith Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.