bigboodydaddy Posted March 17, 2013 Report Share Posted March 17, 2013 An air rifle spinner made fron a few bits of scrap from the skip at work Quote Link to comment Share on other sites More sharing options...
Scottyj Posted March 17, 2013 Report Share Posted March 17, 2013 Wicked if it works then y spend money.. Very inventive Quote Link to comment Share on other sites More sharing options...
Rimfireboy Posted March 18, 2013 Report Share Posted March 18, 2013 Nice. Quote Link to comment Share on other sites More sharing options...
bigfish Posted March 19, 2013 Report Share Posted March 19, 2013 iv dont almost the same but used empty caplets if drilled in the middle they spin well but if offcentre they swing and settle back were they were its good to make your own and save money andy Quote Link to comment Share on other sites More sharing options...
camokid Posted March 19, 2013 Report Share Posted March 19, 2013 i made some with tea spoons just bent the tops over slide a rod in job done Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted March 19, 2013 Report Share Posted March 19, 2013 heres one ive just made for a customer....for .22lr Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted March 19, 2013 Report Share Posted March 19, 2013 some more ive made all for .22lr Quote Link to comment Share on other sites More sharing options...
browning123 Posted March 19, 2013 Report Share Posted March 19, 2013 heres one ive just made for a customer....for .22lr Tidy job - what price might be interested! Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted March 19, 2013 Report Share Posted March 19, 2013 knockovers were £58 posted spinners are £48 posted i do all sorts of custom target holders do a search on pw for my work....(in sales mainly) Quote Link to comment Share on other sites More sharing options...
bigboodydaddy Posted March 19, 2013 Author Report Share Posted March 19, 2013 They look great buddy bet they didnt take 10 mins to make. I made some targets for another member on here for his .223 from scrap 15mm plate but he had to pick them up as they were very heavy didnt charge anything for them as he took me out a few times on his permission. Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted March 19, 2013 Report Share Posted March 19, 2013 no pal they take me a long time to make ive done a hell of a lot for people on here and usually have a lot of adverts running but im inbeetween moving house so had to slow the orders down a bit. Quote Link to comment Share on other sites More sharing options...
smokinggun Posted March 20, 2013 Report Share Posted March 20, 2013 (edited) Yours all look very good, here's one i knocked up at work out of some wood from a pallet and some bolts with nuts welded on the top to slide on and coins welded on the bottom as targets for the air rifles for a bit of fun. Edited March 20, 2013 by smokinggun Quote Link to comment Share on other sites More sharing options...
figgy Posted March 21, 2013 Report Share Posted March 21, 2013 Many years ago I used to make my own out of old spoons twisted and drilled to slide onto a bar. Get the hole right and they span good then settled back down. Did make a knock down one that as you knocked it down it would give another target to knock it back. The ones you have made for .22 lr look good. Figgy Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted March 22, 2013 Report Share Posted March 22, 2013 I make loads for .22lr there's plenty of call for rimfire stuff where as Airgun there 10 a penny. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.