Drongo Posted December 7, 2013 Report Share Posted December 7, 2013 Something like Araldite do the job without melting everything...?? Quote Link to comment Share on other sites More sharing options...
Davyo Posted December 8, 2013 Report Share Posted December 8, 2013 (edited) That right mate you need the 32mm.I got mine from Merlin Sales on Ebay I wrapped a bit if tape round the thread and glued it into the 35mm end if the tube which steps up to 45mm for my scope.Nice tight fit as scope eye piece is 47mm.I made various adaptors for my scopes.A good tip if you have a nice tight fit is to carry a bit of washing up liquid in your kit.I put a drop on my finger and rub it on the tube before fitting to the scope. Look back at Kiffys part of the thread where he put shrink wrap on his tubes which made a cracking neat job. Edited December 8, 2013 by Davyo Quote Link to comment Share on other sites More sharing options...
Pestcontrol150 Posted December 9, 2013 Report Share Posted December 9, 2013 Shame about this thread looks like its died down come on boys give evo the credit for all the info he has helped many wiv atb (bob) Quote Link to comment Share on other sites More sharing options...
Dave1087 Posted December 9, 2013 Report Share Posted December 9, 2013 Thank for all your help evo this is what I have gone with in the end for the ir Quote Link to comment Share on other sites More sharing options...
mick miller Posted December 9, 2013 Report Share Posted December 9, 2013 (edited) Thank for all your help evo this is what I have gone with in the end for the ir Is that one made by Ian or Mark? Edited December 9, 2013 by mick miller Quote Link to comment Share on other sites More sharing options...
Dave1087 Posted December 9, 2013 Report Share Posted December 9, 2013 Is that one made by Ian or Mark? Ian and it's 12v Quote Link to comment Share on other sites More sharing options...
mick miller Posted December 9, 2013 Report Share Posted December 9, 2013 Good choice. Should last instead of falling to bits after a few months, his workmanship is very good. Quote Link to comment Share on other sites More sharing options...
Dave1087 Posted December 9, 2013 Report Share Posted December 9, 2013 Hi can someone tell me please which camera is the best out of these two I have ordered the one on the left but they have called me today and said they have not got any in stock so they are sending me this one on the right for the same money will it be ok Thanks Dave Quote Link to comment Share on other sites More sharing options...
Dave-G Posted December 9, 2013 Report Share Posted December 9, 2013 (edited) 420 tvl ain't the best but its not bad but the answer is: Much more betterer, look at the lux value, and it's ex view too. You lucky chap. Edited December 9, 2013 by Dave-G Quote Link to comment Share on other sites More sharing options...
Dave1087 Posted December 9, 2013 Report Share Posted December 9, 2013 420 tvl ain't the best but its not bad but the answer is: Much more betterer, look at the lux value, and it's ex view too. You lucky chap. Pm sent thanks for that Dave Quote Link to comment Share on other sites More sharing options...
Davyo Posted December 9, 2013 Report Share Posted December 9, 2013 Is it sure24 your buying off?their service is great,they discounted my EJ230 by £20 and offered me 20% discount on my next purchase.As Dave-G states you have ended up with a better camera. Quote Link to comment Share on other sites More sharing options...
Dave1087 Posted December 9, 2013 Report Share Posted December 9, 2013 Yes I am very in pressed with them ordered yesterday they called me at 9 this morning and said sorry we don't have it in stock but we have a better one that you can have for the same price So I thought it would be rude not to have it :-) Quote Link to comment Share on other sites More sharing options...
Davyo Posted December 9, 2013 Report Share Posted December 9, 2013 Wouldnt mind having a crack using the NiteDevil board camera exview with lux 0.00019 they have.Might need to get advise from evo. Quote Link to comment Share on other sites More sharing options...
evo Posted December 10, 2013 Author Report Share Posted December 10, 2013 Wouldnt mind having a crack using the NiteDevil board camera exview with lux 0.00019 they have.Might need to get advise from evo. davyo, don't bother with it mate, their lux of o,ooo19 is over exaggerated mate , you wont get a better camera than the one you have bud, its certainly one of the best out there for the money and you can pay a lot more for cameras that will not perform as well as it, DAVE 1087, you lucky sod lol, yes you have a better camera for the same price mate,,,,well done atb Evo Quote Link to comment Share on other sites More sharing options...
Pestcontrol150 Posted December 11, 2013 Report Share Posted December 11, 2013 Ya for this night vision you need good cameras key factor **** camra no good lol u need to see things real clear and make stuff out init cheers for ur pm dave about mine atb Quote Link to comment Share on other sites More sharing options...
Tonka02 Posted December 29, 2013 Report Share Posted December 29, 2013 Nearly finished just a few more tweeks but I'm very happy with the result so far. Quote Link to comment Share on other sites More sharing options...
Camlais Posted December 29, 2013 Report Share Posted December 29, 2013 Nice setup, is the different camera mounting to give better adjustability, or are you using a different camera/lens system? cheers Camlais Quote Link to comment Share on other sites More sharing options...
evo Posted December 29, 2013 Author Report Share Posted December 29, 2013 tonka02 you will get better results if you encase your camera into a tube mate so as the camera is not affected by any exterior light, it will only then receive the light from the scope mate, hope this helps Evo Quote Link to comment Share on other sites More sharing options...
Tonka02 Posted December 29, 2013 Report Share Posted December 29, 2013 (edited) Thanks Evo I will give it ago thanks mate. Also the camera I'm using is a 3.5mm to 16mm verifocal IR sensitive camera gives some awsome results just waiting for a UTC Osd controller to turn up. Edited December 29, 2013 by Tonka02 Quote Link to comment Share on other sites More sharing options...
shawn9914 Posted December 29, 2013 Report Share Posted December 29, 2013 evo do you have a link for the tube you set your camera in cheers shawn Quote Link to comment Share on other sites More sharing options...
Davyo Posted December 29, 2013 Report Share Posted December 29, 2013 AP motorstore on flee bay all diff diameters also step down tubes average cost £7. Quote Link to comment Share on other sites More sharing options...
shawn9914 Posted December 29, 2013 Report Share Posted December 29, 2013 AP motorstore on flee bay all diff diameters also step down tubes average cost £7. cant find them you got a link to their shop please Quote Link to comment Share on other sites More sharing options...
Tonka02 Posted December 29, 2013 Report Share Posted December 29, 2013 Try this put this code in flee bay mate 330865448009 Quote Link to comment Share on other sites More sharing options...
evo Posted December 30, 2013 Author Report Share Posted December 30, 2013 evo do you have a link for the tube you set your camera in cheers shawn shawn I use carbon fibre made to fit the individual scope, this I do to make it rigid and so the system is not affected by recoil,, hope this helps bud atb Evo Quote Link to comment Share on other sites More sharing options...
shawn9914 Posted December 30, 2013 Report Share Posted December 30, 2013 cheers evo that might be something I can look at in the future then cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.