steve_b_wales Posted August 13, 2013 Report Share Posted August 13, 2013 I'm looking to buy a bracket for my NiteMaster 800 torch to fit a 30mm scope. Does anyone know of a good, but not too expensive one that will suit? Quote Link to comment Share on other sites More sharing options...
camokid Posted August 13, 2013 Report Share Posted August 13, 2013 http://www.tacticalscope.co.uk/rapid-release-rifle-scope-and-laser-or-torch-mount-for-25-to-45mm-tubes-1264-p.asp really good shop good service but looks like hes on hols http://ant-supplies.co.uk/Pages/TubeBarrelClampMounts.aspx or ebay http://www.ebay.co.uk/bhp/torch-scope-mount i have two one from ants and one from china ebay both the same hope that hepls Quote Link to comment Share on other sites More sharing options...
keg Posted August 13, 2013 Report Share Posted August 13, 2013 Hi Steve, I've got the 800IR, great bit of kit, I bought it as a kit with the clamp included. Only thing I have found is that it does not allow any fine movement and the beam can be slightly high. Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 13, 2013 Author Report Share Posted August 13, 2013 Hi Steve, I've got the 800IR, great bit of kit, I bought it as a kit with the clamp included. Only thing I have found is that it does not allow any fine movement and the beam can be slightly high. Mine has the red led and also an IR one as well. It's annoying, because I have a clamp that came with my Cluson light. It can be adjusted in all directions, but is just not high enough off my scope, and most of the beam is hitting the back end of my T8 moderator. I think I'll have to go up my shed and see what I can adapt to suit. Quote Link to comment Share on other sites More sharing options...
joe soapy Posted August 13, 2013 Report Share Posted August 13, 2013 If you have a pillar drill, select a suitable bit of 2x2x1 wood, hole saw a suitable size hole for torch, cut across centre of hole to allow tightening onto torch. fit a spare scope mount to scope, cut a 2 inch bit of flat bar, grind to match dovetail and screw onto wood Its cheap, effective and quick to mount Quote Link to comment Share on other sites More sharing options...
Marki Posted August 13, 2013 Report Share Posted August 13, 2013 Loads on Ebay. Most from China but this on is in the UK. http://www.ebay.co.uk/itm/Figure-8-Rifle-Scope-Mount-30mm-Scope-25mm-Laser-Torch-Ring-Side-Weaver-Slots-/370777824108?pt=UK_SportingGoods_Hunting_ShootingSports_ET&hash=item5654149b6c The Chinese stuff isn't too bad. This cost about £8 delivered including laser and torch. Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted August 13, 2013 Report Share Posted August 13, 2013 I'm looking to buy a bracket for my NiteMaster 800 torch to fit a 30mm scope. Does anyone know of a good, but not too expensive one that will suit? Scan for '30mm picatinny rail' on eBay I got a scope mountable rail for my 6x44 then get a suitable set of picatinny type scope rings to attach your light it to the rail. I'll pm you the eBay links when I get home as I've no wi-fi or 3G at the minute. Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted August 13, 2013 Report Share Posted August 13, 2013 Here's the rail-http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=290904058658 And here's the ring-http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=360718112047 Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 13, 2013 Author Report Share Posted August 13, 2013 Here's the rail-http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=290904058658 And here's the ring-http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=360718112047 Thanks. And also thanks also to everyone who came up with suggestions. Quote Link to comment Share on other sites More sharing options...
camokid Posted August 13, 2013 Report Share Posted August 13, 2013 your welcome Quote Link to comment Share on other sites More sharing options...
keg Posted August 13, 2013 Report Share Posted August 13, 2013 Mine has the red led and also an IR one as well. It's annoying, because I have a clamp that came with my Cluson light. It can be adjusted in all directions, but is just not high enough off my scope, and most of the beam is hitting the back end of my T8 moderator. I think I'll have to go up my shed and see what I can adapt to suit. B*gg*r... that is what I was looking at doing, great mind think alike. Mine is to use with my Ward D vision on Sako Quad .17HMR & 22LR and and Weirauch HW60 .222 CF. Wonder if it I possible to raise it. Was it the Clulite bracket that takes any 25mm torch? Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 13, 2013 Author Report Share Posted August 13, 2013 B*gg*r... that is what I was looking at doing, great mind think alike. Mine is to use with my Ward D vision on Sako Quad .17HMR & 22LR and and Weirauch HW60 .222 CF. Wonder if it I possible to raise it. Was it the Clulite bracket that takes any 25mm torch? I believe so. Quote Link to comment Share on other sites More sharing options...
Salop Matt Posted August 13, 2013 Report Share Posted August 13, 2013 Steve, Let me have a look tonight as i may have one you can have ! Dont go buying one yet. ATB Matt Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted August 13, 2013 Author Report Share Posted August 13, 2013 Steve, Let me have a look tonight as i may have one you can have ! Dont go buying one yet. ATB Matt Thanks Matt. Quote Link to comment Share on other sites More sharing options...
keg Posted August 13, 2013 Report Share Posted August 13, 2013 Hmmmm if I clamp it to a fig of 8 that came with the NM800?... Quote Link to comment Share on other sites More sharing options...
telf Posted August 13, 2013 Report Share Posted August 13, 2013 steve i have for sale,page 7,other sales a windage and elevation adjustable torch mount that i bought for my photon but unfortunately it will not fit because of the size and shape of the photon but will be fine on a normal scope atb dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.