Jump to content

yukon photon 5x42


mikesy
 Share

Recommended Posts

On my perm the rabbits spook the second you shine a beam on them and there's not enough time to get them in your sights so I am considering NV

I'm thinking of putting in an order for one of the Yukon Proton's, was hoping to find out if any of you guys have one and how you rate it.

Sole use at present would be for rabbits up to 100m with a .22 LR.

I've never owned or used NV gear , so I'm a total novice and I am trying to avoid buying a white elephant.

Any advice on how it performs would be well appreciated .

Many thanks in advance

Link to comment
Share on other sites

It's got some gripes that much more expensive ones don't have but for £400 its a marmite scope you might get on with or not. It's looking like some are better than others but the importer is aware of some of the focal issues and seems willing to address them. The photon is different to a lot of NVD's in that the low light camera is allowed to work as it was designed to rather than than struggle to draw the images through the several lenses of a dayscope then squeeze it through a 6mm ish diameter exit pupil.

 

As a result it can be used much more covertly with much less Ir illumination that gives away your position to bunnies that are often close enough to hear or smell you, particularly once a powerful light is shone in their direction. Given you are shooting sub 100 yards at red light shy bunnies they will soon be dull red light shy bunnies too unless you keep the Ir to a bare minimum.

 

Lowish Ir lets you get closer - look at these where I drive my 4WD to within 60 ish yards and still don't bother them but a more powerful Ir might have scattered them. I use a compact 501b IR conversion - and yes I'm floating my own boat here because I convert some for people can't follow my thread telling them how to do it. These shots were at air ranges bit you can see well past the quarry. Despite the slightly blurred image and eyebloom which can be cheaply improved you can see the exiting pellet and blood splash on the ground behind them. I'm not saying that out goriness, just pointing out the detail that can be seen with minimal IR signature when using the Photon.

 

 

My 'modified LED lamping torch' thread on here shows you how to convert budget priced 501b red LED lamping torches to an Ir illuminator using a 1 watt Ir module from ebay and an aspheric lens. It's rather drawn out over a long time but it has helped no end of people improve their own torches - whilst myself and a few others learned enough to start converting torches for sale:

 

http://forums.pigeonwatch.co.uk/forums/topic/211717-modified-led-lamping-torches/

Edited by Dave-G
Link to comment
Share on other sites

i been using one for a month or 2 now & am quite pleases with it!

only thing i have noticed with mine or it could be just me.. the picture suffers if the temp drops a little.

used it tonight & it was really clear! took a 100yd fox with it last night too.

Funny that I went out with mine last night it was near freezing and it didn't work nearly as good as it had when warmer. Seemed short of light to me. Only used it for five nights thought something had gone wrong with it will try it again tomorrow.
Link to comment
Share on other sites

Funny that I went out with mine last night it was near freezing and it didn't work nearly as good as it had when warmer. Seemed short of light to me. Only used it for five nights thought something had gone wrong with it will try it again tomorrow.

 

Check that none of the lenses, front or back are steaming up.

 

It could be quite possible that because there is a mini TV display inside which heats up during use that it is creating condensation against the cold lens glass. I have had this problem with my T20 LED torches, it looked like the battery was going flat when in fact the condensation on the lens was acting like a diffuser. Ive given the lenses in my T20's a wipe over with RainX and they have worked perfectly since.

Edited by Alan Maughan
Link to comment
Share on other sites

Hi GRamsay, was in touch with them a few days ago, even though they have it advertised on their website, they have never had them. They said if I do get one that they would like to see it.

I have ordered one, now just have to wait and see how long it takes.

mmmmmm....... I,m starting to think about maybe getting one of these myself for much the same reasons as you. Could you possiblly let me know how you get on? Cheers

Link to comment
Share on other sites

if your using solely for night use and add a ir illuminator probably be ok but if you intend to use daytime there meant to be poor.you may be better of with a addon then you still have day use of your scope without need to rezero.we use a pulsar addon+ ir torch and regularly shoot out to 100 yds+ with 22/17 hmr and very good images

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...